Authors designed an obstacle radar transceiver for ISM band. This work is focused on rectangular microstrip transceiver integrated with innovative metamaterial structure at a height of 3.276 mm from the ground plane. Two rectangular microstrip transceiver is designed for transmitting and receiving purpose. This work is mainly focused on increasing the potential parameters of rectangular microstrip transceiver. RMT along with the proposed innovative metamaterial structure is designed to resonate at 2.259 GHz. Simulation results showed that the impedance bandwidth of the RMT is improved by 575%, return loss is reduced by 391% and efficiency is improved by 28% by incorporating the proposed innovative metamaterial structure. For verifying that the proposed innovative metamaterial structure possesses negative values of Permeability and Permittivity within the operating frequency range, Nicolson-Ross-Weir method (NRW) has been employed. An op-amp and comparator is used to compare the return loss of transmitting and receiving RMT. An indicator is used to indicate difference of return loss and power of transmitting and receiving rectangular microstrip transceiver. For all simulation purpose, computer simulation technology-microwave studio (CST-MWS) software has been used.
A rectangular microstrip patch antenna along with a SSRR based “Double H” shaped metamaterial is proposed and analyzed at a height of 3.2mm from the ground plane. This work is mainly focused on increasing the potential parameters of microstrip patch antennas. The patch antenna along with the proposed metamaterial structure is designed to resonate at 1.84GHz. The impedance bandwidth of the patch antenna along with the proposed metamaterial structure is improved by 12.9MHz and return loss is reduced by 9.89dB. All the simulation work is done by using CST-MWS Software. Double-Negative properties (Negative Permeability and Permittivity) of the proposed metamaterial structure have also been verified using Nicolson-Ross-Weir method (NRW).
The convex closure of entropy vectors for quasiuniform random vectors is the same as the closure of the entropy region. Thus, quasi-uniform random vectors constitute an important class of random vectors for characterizing the entropy region. Moreover, the one-to-one correspondence between quasiuniform codes and quasi-uniform random vectors makes quasiuniform random vectors of central importance for designing effective codes for communication systems. In this paper, we present a novel approach that utilizes quasi-uniform random vectors for characterizing the boundary of the almost entropic region. In particular, we use the notion of quasi-uniform random vectors to establish looseness of known inner bounds for the entropy vectors at the boundary of the almost entropic region for three random variables. For communication models such as network coding, our approach can be applied to design network codes from quasi-uniform entropy vectors.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.