quencies that are related to the input signal. Thus, differences are no longer related to the use of small-or large-amplitude considerations, and nonlinearity-often regarded as a complicating factor-is now seen as a distinct advantage. Traditional techniquesIn voltammetry, a time t dependent dc potential E dc (whose value relative to a reference electrode is known) is applied to a working electrode that is in contact with an electroactive species. In cyclic voltammetry (CV; Figure 1a), the potential is commonly cycled by scanning in one direction until the socalled switching potential is reached and then reversing the scan. This approach provides information about both the oxidation and reduction components of an electron-transfer process. Measurement of the current I as a function of E dc generates a voltammogram (Figures 1b-d). An equivalent plot of I versus t Alan M. Bond

No abstract

The redox chemistry of the electron entry/exit site in Escherichia coli hydrogenase-1 is shown to play a vital role in tuning biocatalysis. Inspired by nature, we generate a HyaA-R193L variant to disrupt a proposed Arg–His cation−π interaction in the secondary coordination sphere of the outermost, “distal”, iron–sulfur cluster. This rewires the enzyme, enhancing the relative rate of H2 production and the thermodynamic efficiency of H2 oxidation catalysis. On the basis of Fourier transformed alternating current voltammetry measurements, we relate these changes in catalysis to a shift in the distal [Fe4S4]2+/1+ redox potential, a previously experimentally inaccessible parameter. Thus, metalloenzyme chemistry is shown to be tuned by the second coordination sphere of an electron transfer site distant from the catalytic center.

No abstract

Rapid disulfide bond formation and cleavage is an essential mechanism of life. Using large amplitude Fourier transformed alternating current voltammetry (FTacV) we have measured previously uncharacterized disulfide bond redox chemistry in Escherichia coli HypD. This protein is representative of a class of assembly proteins that play an essential role in the biosynthesis of the active site of [NiFe]-hydrogenases, a family of H-activating enzymes. Compared to conventional electrochemical methods, the advantages of the FTacV technique are the high resolution of the faradaic signal in the higher order harmonics and the fact that a single electrochemical experiment contains all the data needed to estimate the (very fast) electron transfer rates (both rate constants ≥ 4000 s) and quantify the energetics of the cysteine disulfide redox-reaction (reversible potentials for both processes approximately -0.21 ± 0.01 V vs SHE at pH 6). Previously, deriving such data depended on an inefficient manual trial-and-error approach to simulation. As a highly advantageous alternative, we describe herein an automated multiparameter data optimization analysis strategy where the simulated and experimental faradaic current data are compared for both the real and imaginary components in each of the 4th to 12th harmonics after quantifying the charging current data using the time-domain response.

Under most experimental conditions, a distinctly nonlinear background current is encountered in all forms of voltammetry which arises from the potential dependence of the capacitance. The nonlinear background current has been successfully modeled under large amplitude sinusoidal ac voltammetric conditions with a fourth order polynomial. The model was applied to a dummy cell containing a nonideal ceramic capacitor and commonly used electrodes. The nonlinearity in behavior of the background capacitance is particularly significant when considering the discrimination between the Faradaic and background contributions in the higher order harmonics resolved in ac voltammetry by Fourier transform-inverse Fourier transform approaches and in the simulation of the background current and hence double-layer capacitance as a function of potential. Typically, measurable background current under large amplitude conditions is detectable in the dc and fundamental to fourth harmonic components in large amplitude ac voltammetry. For analytical purposes, this background current can be corrected on a per harmonic basis without the need for any model. Background correction has been successfully applied to the first four harmonics for the oxidation of ferrocenemonocarboxylic acid over the concentration range of 5-500 microM in aqueous 0.5 M NaCl solution.

The analysis of dc cyclic voltammograms of surface-confined metalloproteins is complicated by large background currents, significant ohmic iRu drop, and frequency dispersion related to protein and electrode surface inhomogeneity. The use of large-amplitude Fourier transform ac voltammetry for the quantification of the electron-transfer properties of a thin film of redox-active protein azurin adsorbed onto edge-plane, basal-plane, and highly oriented pyrolytic graphite electrode surfaces has been evaluated and compared to results obtained by dc cyclic voltammetry. In principle, it has been established that fourth and higher harmonic sine-wave data are ideally suited for analysis of electron-transfer processes as they are almost completely devoid of background capacitance current contributions. However, uncompensated resistance has a higher impact on these components, as is the case with fast scan rate dc techniques, so strategies to include this term in the simulations have been investigated. Application of recommended strategies for the evaluation of the electron-transfer properties of azurin adsorbed onto three forms of graphite, each having different background or uncompensated resistance values, is described and compared to results obtained by traditionally used forms of cyclic voltammetry. The electron-transfer rate constant, k0', of azurin at a highly oriented pyrolytic graphite electrode surface was approximately 250 s(-1), compared with > or =1000 s(-1) at edge-plane and basal-plane graphite electrodes. The significantly lower k0' value found at the highly oriented pyrolytic graphite electrode was related to the relatively low level of edge-plane defect sites present at the surface of this electrode. However, analysis of high ac harmonics suggests that frequency dispersion is substantial at all electrode surfaces. Such effects in these diffusionless situations are significantly enhanced relative to solution-phase voltammetry, where overlay of diffusion layers minimizes the impact of heterogeneity.

No abstract