This article aims to review nature-inspired chemical sensors for enabling fast, relatively inexpensive, and minimally (or non-) invasive diagnostics and follow-up of the health conditions. It can be achieved via monitoring of biomarkers and volatile biomarkers, that are excreted from one or combination of body fluids (breath, sweat, saliva, urine, seminal fluid, nipple aspirate fluid, tears, stool, blood, interstitial fluid, and cerebrospinal fluid). The first part of the review gives an updated compilation of the biomarkers linked with specific sickness and/or sampling origin. The other part of the review provides a didactic examination of the concepts and approaches related to the emerging chemistries, sensing materials, and transduction techniques used for biomarker-based medical evaluations. The strengths and pitfalls of each approach are discussed and criticized. Future perspective with relation to the information and communication era is presented and discussed.

Achieving highly accurate responses to external stimuli during human motion is a considerable challenge for wearable devices. The present study leverages the intrinsically high surface‐to‐volume ratio as well as the mechanical robustness of nanostructures for obtaining highly‐sensitive detection of motion. To do so, highly‐aligned nanowires covering a large area were prepared by capillarity‐based mechanism. The nanowires exhibit a strain sensor with excellent gauge factor (≈35.8), capable of high responses to various subtle external stimuli (≤200 µm deformation). The wearable strain sensor exhibits also a rapid response rate (≈230 ms), mechanical stability (1000 cycles) and reproducibility, low hysteresis (<8.1%), and low power consumption (<35 µW). Moreover, it achieves a gauge factor almost five times that of microwire‐based sensors. The nanowire‐based strain sensor can be used to monitor and discriminate subtle movements of fingers, wrist, and throat swallowing accurately, enabling such movements to be integrated further into a miniaturized analyzer to create a wearable motion monitoring system for mobile healthcare.

A good method of synthesizing Ti3C2Tx (MXene) is critical for ensuring its success in practical applications, e.g., electromagnetic interference shielding, electrochemical energy storage, catalysis, sensors, and biomedicine. The main concerns focus on the moderation of the approach, yield, and product quality. Herein, a modified approach, organic solvent-assisted intercalation and collection, was developed to prepare Ti3C2Tx flakes. The new approach simultaneously solves all the concerns, featuring a low requirement for facility (centrifugation speed < 4000 rpm in whole process), gram-level preparation with remarkable yield (46.3%), a good electrical conductivity (8672 S cm−1), an outstanding capacitive performance (352 F g−1), and easy control over the dimension of Ti3C2Tx flakes (0.47–4.60 μm2). This approach not only gives a superb example for the synthesis of other MXene materials in laboratory, but sheds new light for the future mass production of Ti3C2Tx MXene.

No abstract

Globally, bladder cancer (BLC) is one of the most common cancers and has a high recurrence and mortality rate. Current clinical diagnostic approaches are either invasive or inaccurate. Here, we report on a cost-efficient, artificially intelligent chemiresistive sensor array made of polyaniline (PANI) derivatives that can noninvasively diagnose BLC at an early stage and maintain postoperative surveillance through ″smelling″ clinical urine samples at room temperature. In clinical trials, 18 healthy controls and 76 BLC patients (60 and 16 at early and advanced stages, respectively) are assessed by the artificial olfactory system. With the assistance of a support vector machine (SVM), very high sensitivity and accuracy from healthy controls are achieved, exceeding those obtained by the current techniques in practice. In addition, the recurrences of both early and advanced stages are diagnosed well, with the effect of confounding factors on the performance of the artificial olfactory system found to have a negligible influence on the diagnostic performance. Overall, this study contributes a novel, noninvasive, easy-to-use, inexpensive, real-time, accurate method for urine disease diagnosis, which can be useful for personalized care/diagnosis and postoperative surveillance, resulting in saving more lives.

Human respiration reflects abundant physiological information and could enable non‐invasive monitoring, providing information about various biological parameters such as respiration rate and depth. The rapidly growing field of humidity sensors bring forward the requirement for good performance. In this work, by virtue of good hydrophilicity and conductivity, a MXene/thermoplastic polyurethane (TPU) composite film is prepared by coating MXene nanosheets on chitosan‐modified TPU electrospun nanofibers via electrostatic interactions, for fabricating a humidity sensor. Based on the principle that the tunnel resistance changing with water molecules influences the distance of MXene nanosheets, the MXene/TPU humidity sensor exhibits fast response (12 s), wide humidity response range (11–94% RH), low hysteresis (<7% RH), and excellent repeatability. The humidity sensor can be assembled with a face mask for distinguishing different human respiration patterns and accurately monitoring respiratory signals during different physical activities, suggesting its promising applications in the fields of respiratory monitoring.

No abstract

A carbon nanosphere nanofluid (CNS-nanofluid) was successfully prepared through the non-covalent modification of carbon nanosphere (CNS) with the specific ionic liquid (i.e., [M2070][VBS]) at first. The resulting CNS-nanofluid is a homogeneous and stable fluid with liquid-like behaviour at room temperature, and which shows better dispersion stability in its good solvents and improved processability than the pristine CNS. Subsequently, this CNS-nanofluid was used as a kind of novel functional filler and incorporated into epoxy matrix to prepare the CNS-nanofluid filled epoxy composites (CNS-nanofluid/EP composites). The toughness and thermal properties of those CNS-nanofluid/EP composites were carefully characterized and analysed. And it was found that this CNS-nanofluid could respectively improve the impact toughness and glass transition temperature of the CNS-nanofluid/EP composites to 19.8 kJ/m2 and 122.5 °C at the optimum amount, demonstrating that this CNS-nanofluid is a kind of promising functional filler to achieve robust epoxy composites, and thus opening up new possibilities with great significance for epoxy composites in high-performance applications.