Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.

Current high temperature superconducting (HTS) wires exhibit high current densities enabling their use in electrical rotating machinery. The possibility of designing high power density superconducting motors operating at reasonable temperatures allows for new applications in mobile systems in which size and weight represent key design parameters. Thus, all-electric aircrafts represent a promising application for HTS motors. The design of such a complex system as an aircraft consists of a multi-variable optimization that requires computer models and advanced design procedures. This paper presents a specific sizing model of superconducting propulsion motors to be used in aircraft design. The model also takes into account the cooling system. The requirements for this application are presented in terms of power and dynamics as well as a load profile corresponding to a typical mission. We discuss the design implications of using a superconducting motor on an aircraft as well as the integration of the electrical propulsion in the aircraft, and the scaling laws derived from physics-based modeling of HTS motors.

Value driven design is an innovative design process that utilizes the optimization of a system level value function to determine the best possible design. This contrasts with more traditional systems engineering techniques, which rely on satisfying requirements to determine the design solution. While ‘design for value’ is intuitively acceptable, the transformation of value driven design concepts into practical tools and methods for its application is challenging. This, coupled with the growing popularity of value-centric design philosophies, has led to a proposed research agenda in value driven design. This research agenda asks fundamental questions about the design philosophy and attempts to identify areas of significant challenge. The research agenda is meant to stimulate discussion in the field, as well as prompt research that will lead to the development of tools and methodologies that will facilitate the application of value driven design and further the state of the art.

No abstract

The increasing need to understand complex products and systems with long life spans, presents a significant challenge to designers who increasingly require a broader understanding of the operational aspects of the system. This demands an evolution in current design practice, as designers are often constrained to provide a subsystem solution without full knowledge of the global system operation. Recently there has been a push to consider value centric approaches which should facilitate better or more rapid convergence to design solutions with predictable completion schedules. Value Driven Design is one such approach, in which value is used as the system top level objective function. This provides a broader view of the system and enables all sub-systems and components to be designed with a view to the effect on project value. It also has the capacity to include value expressions for more qualitative aspects, such as environmental impact. However, application of the method to date has been restricted to comparing value in a programme where the lifespan is fixed and known a priori. This paper takes a novel view of value driven design through the surplus value objective function, and shows how it can be used to identify key sensitivities to guide designers in design trade-off decisions. By considering a new time based approach it can be used to identify optimum programme life-span and hence allow trade-offs over the whole product life.

No abstract

Traditionally, most fixed wing and rotary wing aircraft have been powered by internal combustion engines that consume hydrocarbon fuels. Only in a few exceptional designs, such as solar powered air-vehicles, are attempts made to apply alternate energy sources. In the past decade, however, the aerospace community has shown a renewed interest in alternate energy sources for revolutionary propulsion systems. In particular, fuel cells are increasingly being considered as an alternate power source for their potential outstanding advantages over the traditional power system. Nevertheless, traditional aircraft sizing methods are not immediately applicable for such unconventional-energy consuming air-vehicle designs. This paper proposes a generalized aircraft sizing formulation that is also applicable to revolutionary aircraft concepts powered by unconventional energy sources and/or have revolutionary propulsion systems. A power based formulation, which allows easy tracking of energy transformation process from the first power generation to the last propulsive power production, is introduced. Lastly, a generalized aircraft weight estimation formulation that is also valid for unconventional-energy consuming propulsion systems is developed.

In today's atmosphere of lower U.S. defense spending and reduced research budgets, determining how to allocate resources for research and design has become a critical and challenging task. In the area of aircraft design there are many promising technologies to be explored, yet limited funds with which to explore them. In addition, issues concerning uncertainty in technology readiness as well as the quantification of the impact of a technology (or combinations of technologies), are of key importance during the design process. The methodology presented in this paper details a comprehensive and structured process in which to explore the effects of technology for a given baseline aircraft. This process, called Technology Impact Forecasting (TIF), involves the creation of a forecasting environment for use in conjunction with defined technology scenarios. The advantages and limitations of the method will be discussed, as well its place in an overall methodology used for technology infusion. In addition, the example TIF application used in this paper, that of an Uninhabited Combat Aerial Vehicle, serves to illustrate the applicability of this methodology to a military system. Analysis Cases From DoE System Under Consideration Sensitivity to Inputs Step 1: Effect Screening Input Cases for Analysis Responses-Linear Fit ANOVA