Nanostructured heaters based on laser-induced graphene (LIG) are promising for heat generation and temperature control in a variety of applications due to their high efficiency as well as a fast, facile, and highly scalable fabrication process. While recent studies have shown that LIG can be written on a wide range of precursors, the reports on LIG-based heaters are mainly limited to polyimide film substrates. Here, we develop and characterize nanostructured heaters by direct writing of laser-induced graphene on nonuniform and structurally porous aramid woven fabric. The synthesis and writing of graphene on aramid fabric is conducted using a 10.6 μm CO 2 laser. The quality of laser-induced graphene and electrical properties of the heater fabric is tuned by controlling the lasing process parameters. Produced heaters exhibit good electrothermal efficiency with steady-state temperatures up to 170 °C when subjected to an input power density of 1.5 W cm −2 . In addition, the permeable texture of LIG−aramid fabric heaters allows for easy impregnation with thermosetting resins. We demonstrate the encapsulation of fabric heaters with two different types of thermosetting resins to develop both flexible and stiff composites. A flexible heater is produced by the impregnation of LIG− aramid fabric by silicone rubber. While the flexible composite heater exhibits inferior electrothermal performance compared to neat LIG−aramid fabric, it shows consistent electrothermal performance under various electrical and mechanical loading conditions. A multifunctional fiber-reinforced composite panel with integrated de-icing functionality is also manufactured using one ply of LIG− aramid fabric heater as part of the composite layup. The results of de-icing experiments show excellent de-icing capability, where a 5 mm thick piece of ice is completely melted away within 2 min using an input power of 12.8 W.
Defect-mediated energy transfer is an energy transfer process between midgap electronic states in a semiconductor nanocrystal (NC) and molecular acceptors, such as fluorescent dye molecules. Super-resolution fluorescence microscopy represents an exciting technique for pinpointing the nanoscale positions of lattice defect sites in, for example, a micrometer-sized particle or thin film sample by spatially resolving the location of the acceptor dye molecules with nanometer resolution. Toward this goal, our group performed ensemble-level, time-resolved fluorescence spectroscopy measurements of ZnO NC/Alexafluor 555 (A555) mixtures and calculated that the emissive defect sites are located, on average, 0.5 nm from the NC surface [NilssonZ. N. Nilsson, Z. N. J. Chem. Phys.2021154054704]. However, ensemble-level measurements cannot spatially resolve the defect sites on single particles, nor can they distinguish between surface-adsorbed dye molecules that participate in the energy transfer (EnT) process from those that do not. In this work, we compared the photoluminescence intensity trajectories of 789 isolated, single ZnO NC donors to those of 73 non-specifically bound and five specifically bound ZnO NC/A555 pairs, where the donor and acceptor centroid positions were separated by a distance that was smaller than our localization precision (40 nm). We observed minor fluorescence intensity fluctuations in the donor and defect channels instead of clear anticorrelated intensity fluctuations, which could be explained by (1) the presence of multiple emissive defect sites per NC, (2) donor–acceptor separation distances slightly larger than the Förster radius (R 0 = 3.1 nm; defined as the distance at which EnT is 50% efficient), and/or (3) poor dipole–dipole coupling. The single molecule imaging methodology we developed, an alternating ultraviolet–visible excitation sequence combined with multicolor photon detection, successfully distinguishes specifically bound and non-specifically bound NC/dye pairs and can be applied to study a wide range of hybrid NC/dye energy transfer systems.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.