Micro-light-emitting-diodes (μLEDs) with size-independent peak external quantum efficiency behavior was demonstrated from 10 × 10 μm2 to 100 × 100 μm2 by employing a combination of chemical treatment and atomic-layer deposition (ALD) sidewall passivation. The chemical treatment and sidewall passivation improved the ideality factors of μLEDs from 3.4 to 2.5. The results from the combination of chemical treatment and ALD sidewall passivation suggest the issue of size dependent efficiency can be resolved with proper sidewall treatments after dry etching.

Compact electronic systems that perform rapid, precise mechanical characterization of living biological tissues have important potential uses in monitoring and diagnosing various types of human-health disorders. Active devices that perform high-precision, real-time evaluations of deep tissue structures (millimeter-scale) in a precise, digital and non-invasive fashion could complement capabilities of recentlyreported approaches for sensing tissue biomechanics at super cial depths (typically micrometer-scale).This paper introduces a miniature electromagnetic platform that combines a vibratory actuator with a soft strain-sensing sheet for determining the Young's modulus of soft biological tissues, with speci c focus on skin. Experimental and computational studies establish the operational principles and performance attributes through evaluations of synthetic and biological materials, including human skin at various body locations across healthy subject volunteers. The results demonstrate dynamic monitoring of elastic modulus at characteristic depths between ~1 and ~8 mm, depending on the sensor designs.Arrays of such devices support capabilities in both depth pro ling and spatial mapping. Clinical studies on patients with skin disorders highlight potential for accurate targeting of lesions associated with psoriasis, as examples of practical medical utility.

The East and West Coyote Hills in the eastern Los Angeles Basin are the surface expression of uplift accompanying blind reverse faulting. Folded Quaternary strata indicate that the hills are growing and that the faults underlying them are active. Detailed subsurface mapping in the East Coyote Oil Field shows that a previously mapped, reverse separation fault is predominantly an inactive, left‐lateral, strike‐slip fault that is not responsible for the uplift of the East Coyote Hills. The fault responsible for folding and uplift of the Coyote Hills does not cut wells in either the East or West Coyote Oil Fields. To characterize the geometry of the blind fault responsible for folding, we employ dislocation modeling. The dip and upper fault tip depths obtained from modeling suggest that the thrust fault beneath the Coyote Hills may be an extension of the Puente Hills blind thrust fault that continues westward beneath the Santa Fe Springs Oil Field. Modeling results suggest that the segment of the thrust fault responsible for folding the Coyote Hills would have accumulated 1500 m of reverse displacement over the last 1.2 Myr, yielding an average slip rate of 1.3 ± 0.5 mm/yr. The Santa Fe Springs segment of the fault has a slip rate of 1.5 ± 0.4 mm/yr for the last 1.2 Myr. The estimated moment magnitude for a reverse displacement earthquake on the Puente Hills blind thrust ranges from 6.6 to 7.2, depending on the length of the rupture. The estimated average recurrence interval for these earthquakes is 1700–3200 years.

By studying low radiative efficiency blue III-nitride light emitting diodes (LEDs), we find that the ABC model of recombination commonly used for understanding efficiency behavior in LEDs is insufficient and that additional effects should be taken into account. We propose a modification to the standard recombination model by incorporating a bimolecular nonradiative term. The modified model is shown to be in much better agreement with the radiative efficiency data and to be more consistent than the conventional model with very short carrier lifetimes measured by time-resolved photoluminescence in similar, low radiative efficiency material. We present experimental evidence that a hot carrier-generating process is occurring within these devices, in the form of measurements of forward photocurrent under forward bias. The forward photocurrent, due to hot carrier generation in the active region, is present despite the lack of any “efficiency droop”—the usual signature of band-to-band Auger recombination in high-quality III-nitride LEDs. Hot carrier generation in the absence of band-to-band Auger recombination implies that some other source of hot carriers exists within these low radiative efficiency devices, such as trap-assisted Auger recombination.

These data suggest that SFA SI-PTA can be successfully used for limb salvage with minimal morbidity and mortality in a group of patients with severe lower extremity occlusive vascular disease.