Polyethylene terephthalate (PET) is the most important mass‐produced thermoplastic polyester used as a packaging material. Recently, thermophilic polyester hydrolases such as TfCut2 from Thermobifida fusca have emerged as promising biocatalysts for an eco‐friendly PET recycling process. In this study, postconsumer PET food packaging containers are treated with TfCut2 and show weight losses of more than 50% after 96 h of incubation at 70 °C. Differential scanning calorimetry analysis indicates that the high linear degradation rates observed in the first 72 h of incubation is due to the high hydrolysis susceptibility of the mobile amorphous fraction (MAF) of PET. The physical aging process of PET occurring at 70 °C is shown to gradually convert MAF to polymer microstructures with limited accessibility to enzymatic hydrolysis. Analysis of the chain‐length distribution of degraded PET by nuclear magnetic resonance spectroscopy reveals that MAF is rapidly hydrolyzed via a combinatorial exo‐ and endo‐type degradation mechanism whereas the remaining PET microstructures are slowly degraded only by endo‐type chain scission causing no detectable weight loss. Hence, efficient thermostable biocatalysts are required to overcome the competitive physical aging process for the complete degradation of postconsumer PET materials close to the glass transition temperature of PET.

No abstract

The magnetic field dependence of Chemically Induced Dynamic Nuclear Polarization (CIDNP) in solid-state systems is analyzed theoretically with the aim to explain the puzzling sign change of polarization found at low fields [Sci. Rep., 7 (2017) 12111]. We exploit the analysis of polarization in terms of level crossings and level anti-crossings trying to identify the positions of features in the CIDNP field dependence with specific crossings between spin energy levels of the radical pair. Theoretical treatment of solid-state CIDNP reveals a strong orientation dependence of polarization due to the spin dynamics conditioned by anisotropic spin interactions. Specifically, different anisotropic CIDNP mechanisms become active at different magnetic fields and different molecular orientations. Consequently, the field dependence and orientation dependence of polarization need to be analyzed together in order to rationalize experimental observations. By considering both magnetic field and orientation dependence of CIDNP, we are able to explain the previously measured CIDNP field dependence in photosynthetic reaction centers and to obtain a good qualitative agreement between experimental observations and theoretical results.

The biocatalytic degradation of polyethylene terephthalate (PET) emerged recently as a promising alternative plastic recycling method. However, limited activity of previously known enzymes against post-consumer PET materials still prevents the application on an industrial scale. In this study, the influence of ultraviolet (UV) irradiation as a potential pretreatment method for the enzymatic degradation of PET was investigated. Attenuated total reflection Fourier transform infrared (ATR-FTIR) and 1 H solution nuclear magnetic resonance (NMR) analysis indicated a shortening of the polymer chains of UV-treated PET due to intra-chain scissions. The degradation of UV-treated PET films by a polyester hydrolase resulted in significantly lower weight losses compared to the untreated sample. We also examined site-specific and segmental chain dynamics over a time scale of sub-microseconds to seconds using centerband-only detection of exchange, rotating-frame spin-lattice relaxation (T 1ρ ), and dipolar chemical shift correlation experiments which revealed an overall increase in the chain rigidity of the UV-treated sample. The observed dynamic changes are most likely associated with the increased crystallinity of the surface, where a decreased accessibility for the enzymecatalyzed hydrolysis was found. Moreover, our NMR study provided further knowledge on how polymer chain conformation and dynamics of PET can mechanistically influence the enzymatic degradation.

Mono- and dianionic carboranylamidinates are readily available in one-pot reactions directly from o-carborane (1). In situ-monolithiation of 1 followed by treatment with N,N'-diisopropylcarbodiimide, (i)PrN=C=N(i)Pr, or N,N'-dicyclohexylcarbodiimide, CyN=C=NCy, provided the lithium carboranylamidinates (o-C2B10H10C(NH(i)Pr)(=N(i)Pr)-κ(2)C,N)Li(DME) (2a) and (o-C2B10H10C(NH(i)Cy)(=N(i)Cy)-κ(2)C,N)Li(THF)2 (2b). Controlled hydrolysis of 2a,b afforded the free carboranylamidines o-C2B10H11C(NH(i)R)(=N(i)R) (3a: R = (i)Pr, 3b: R = Cy). The first dimetalated carboranylamidinates, o-C2B10H10C(N(i)Pr)(=N(i)Pr)Li2(DME)2 (4a) (DME = 1,2-dimethoxyethane) and o-C2B10H10C(N(i)Pr)(=N(i)Pr)Li2(THF)4 (4b), were prepared in high yield (83% yield) directly from 1 using a simple one-pot synthetic protocol. Treatment of 4b with 2 equiv. of Me3SiCl afforded the disilylated derivative o-C2B10H10-κ(2)C,N-[C(N(i)PrSiMe3)(=N(i)Pr)]SiMe3 (5). Dianionic 4b also served as an excellent precursor for novel inorganic heterocycles incorporating the closo-1,2-C2B10H10 cage, including the unsymmetrical distannene [o-C2B10H10C(N(i)Pr)(=N(i)Pr)-κ(2)C,N]Sn=Sn[((i)PrN)2C(n)Bu]2 (6) and the azaphosphole derivative [o-C2B10H10C(N(i)Pr)(=N(i)Pr)-κ(2)C,N]PPh (7). Surprisingly, it was found that the synthesis of new inorganic ring systems from dianionic carboranylamidinates can also be achieved by employing only 1 equiv. of n-butyllithium in the generation of the anionic carboranylamidinate intermediates. Using this straightforward one-pot synthetic protocol, the Group 14 metallacycles [o-C2B10H10C(NCy)(=NCy)-κ(2)C,N]SiR2 (R = Cl (8), Me (9), Ph (10)) and [o-C2B10H10C(NCy)([=NCy)-κ(2)C,N]GeCl2 (11) have become accessible. The same synthetic strategy could be successfully adapted to prepare the corresponding Group 4 metallocene derivatives Cp2Ti[o-C2B10H10C(NCy)(=NCy)-κ(2)C,N] (12) and Cp2Zr[o-C2B10H10C(NCy)(=NCy)-κ(2)C,N] (13). The molecular structures of 2b, 3b, 4b, 5, 6, 7, 10, 12, and 13 were confirmed by single-crystal X-ray diffraction.