Several high performance polymer:fullerene bulk-heterojunction photo-active layers, deposited from the non-halogenated solvents o-xylene or anisole in combination with the eco-compatible additive p-anisaldehyde, are investigated. The respective solar cells yield excellent power conversion efficiencies up to 9.5%, outperforming reference devices deposited from the commonly used halogenated chlorobenzene/1,8-diiodooctane solvent/additive combination. The impact of the processing solvent on the bulk-heterojunction properties is exemplified on solar cells comprising benzodithiophenethienothiophene co-polymers and functionalized fullerenes (PTB7:PC71BM). The additive p-anisaldehyde improves film formation, enhances polymer order, reduces fullerene agglomeration and shows high volatility, thereby positively affecting layer deposition, improving charge carrier extraction and reducing drying time, the latter being crucial for future large area roll-to-roll device fabrication.

Energy-harvesting from low-temperature environmental heat via thermoelectric generators (TEG) is a versatile and maintenance-free solution for large-scale waste heat recovery and supplying renewable energy to a growing number of devices in the Internet of Things (IoT) that require an independent wireless power supply. A prerequisite for market competitiveness, however, is the cost-effective and scalable manufacturing of these TEGs. Our approach is to print the devices using printable thermoelectric polymers and composite materials. We present a mass-producible potentially low-cost fully screen printed flexible origami TEG. Through a unique two-step folding technique, we produce a mechanically stable 3D cuboidal device from a 2D layout printed on a thin flexible substrate using thermoelectric inks based on PEDOT nanowires and a TiS2:Hexylamine-complex material. We realize a device architecture with a high thermocouple density of 190 per cm² by using the thin substrate as electrical insulation between the thermoelectric elements resulting in a high-power output of 47.8 µWcm−² from a 30 K temperature difference. The device properties are adjustable via the print layout, specifically, the thermal impedance of the TEGs can be tuned over several orders of magnitudes allowing thermal impedance matching to any given heat source. We demonstrate a wireless energy-harvesting application by powering an autonomous weather sensor comprising a Bluetooth module and a power management system.

No abstract

We report on solution‐processed, semitransparent organic solar cells that are implemented as lenses in sunglasses. The electrical power provided by the lens‐fitted solar cells sustains a microelectronic circuit that is used to read out temperature and illumination intensity sensors and to make this information available on two displays integrated into the temples of the “Solar Glasses”. The microelectronic circuit is designed to operate at illumination intensities down to 500 lux, rendering the Solar Glasses suitable for outdoor and indoor use as well as for operation in diffuse light. Hence, this case study provides an example for consumer‐oriented mobile applications, self‐powered by integrated solar cells, which specifically exploit the unique properties of organic solar cells.