The syntheses of a family of highly ordered mesoporous polymers and carbon frameworks from organic−organic assembly of triblock copolymers with soluble, low-molecular-weight phenolic resin precursors (resols) by an evaporation induced self-assembly strategy have been reported in detail. The family members include two-dimensional hexagonal (space group, p6m), three-dimensional bicontinuous (Ia3̄d), body-centered cubic (Im3̄m), and lamellar mesostructures, which are controlled by simply adjusting the ratio of phenol/template or poly(ethylene oxide)/poly(propylene oxide) in the templates. A five-step mechanism from organic−organic assembly has been demonstrated. Cubic FDU-14 with a gyroidal mesostructure of polymer resin or carbon has been synthesized for the first time by using the copolymer Pluronic P123 as a template in a relatively narrow range. Upon calcination at 350 °C, the templates should be removed to obtain mesoporous polymers, and further heating at above a critical temperature of 600 °C transforms the mesoporous polymers to the homologous carbon frameworks. The mesoporous polymer resin and carbon product materials exhibit ordered structures, high surface areas, (670−1490 m2/g), large pore volumes (0.65−0.85 cm3/g), and uniform, large pore sizes (7.0−3.9 nm), as well as very thick pore walls (6−8 nm). The carbon open frameworks with covalently bonded constructions and thick pore walls exhibit high thermal stability (>1400 °C). Our results show that the feed gas used during the calcination has a great influence on the porosity of the products. The presence of a small amount of oxygen facilitates the large pore sizes and high surface areas of mesoporous materials with different mesostructures. An extraction method employing sulfuric acid can also decompose the template from hexagonal mesostructured polymers with little framework shrinkage. Preliminary studies of the mechanical and electrochemical properties of mesoporous carbon molecular sieves are also presented.

Salinity difference between seawater and river water is a sustainable energy resource that catches eyes of the public and the investors in the background of energy crisis. To capture this energy, interdisciplinary efforts from chemistry, materials science, environmental science, and nanotechnology have been made to create efficient and economically viable energy conversion methods and materials. Beyond conventional membrane-based processes, technological breakthroughs in harvesting salinity gradient power from natural waters are expected to emerge from the novel fluidic transport phenomena on the nanoscale. A major challenge toward real-world applications is to extrapolate existing single-channel devices to macroscopic materials. Here, we report a membrane-scale nanofluidic device with asymmetric structure, chemical composition, and surface charge polarity, termed ionic diode membrane (IDM), for harvesting electric power from salinity gradient. The IDM comprises heterojunctions between mesoporous carbon (pore size ∼7 nm, negatively charged) and macroporous alumina (pore size ∼80 nm, positively charged). The meso-/macroporous membrane rectifies the ionic current with distinctly high ratio of ca. 450 and keeps on rectifying in high-concentration electrolytes, even in saturated solution. The selective and rectified ion transport furthermore sheds light on salinity-gradient power generation. By mixing artificial seawater and river water through the IDM, substantially high power density of up to 3.46 W/m(2) is discovered, which largely outperforms some commercial ion-exchange membranes. A theoretical model based on coupled Poisson and Nernst-Planck equations is established to quantitatively explain the experimental observations and get insights into the underlying mechanism. The macroscopic and asymmetric nanofluidic structure anticipates wide potentials for sustainable power generation, water purification, and desalination.

Porous carbon nitride (CN) spheres with partially crystalline frameworks have been successfully synthesized via a nanocasting approach by using spherical mesoporous cellular silica foams (MCFs) as a hard template, and ethylenediamine and carbon tetrachloride as precursors. The resulting spherical CN materials have uniform diameters of ca. 4 μm, hierarchical three-dimensional (3-D) mesostructures with small and large mesopores with pore diameters centered at ca. 4.0 and 43 nm, respectively, a relatively high BET surface area of ~550 m 2 /g, and a pore volume of 0.90 cm 3 /g. High-resolution transmission electron microscope (HRTEM) images, wide-angle X-ray diffraction (XRD) patterns, and Raman spectra demonstrate that the porous CN material has a partly graphitized structure. In addition, elemental analyses, X-ray photoelectron spectra (XPS), Fourier transform infrared spectra (FT-IR), and CO 2 temperature-programmed desorption (CO 2 -TPD) show that the material has a high nitrogen content (17.8 wt%) with nitrogen-containing groups and abundant basic sites. The hierarchical porous CN spheres have excellent CO 2 capture properties with a capacity of 2.90 mmol/g at 25 °C and 0.97 mmol/g at 75 °C , superior to those of the pure carbon materials with analogous mesostructures. This can be mainly attributed to the abundant nitrogen-containing basic groups, hierarchical mesostructure, relatively high BET surface area and stable framework. Furthermore, the presence of a large number of micropores and small mesopores also enhance the CO 2 capture performance, owing to the capillary condensation effect.