Friction is an intensely studied feature in orthodontics, as the sliding mechanics approach remains one of the most utilized techniques in current practice, and the question of whether self-ligating brackets produce less friction than conventional brackets still stands. The objective of this study was to compare a self-ligating system with different closing mechanisms and a conventional system with different ligating mechanisms regarding their frictional properties. Laboratory measurements were performed using an advanced materials testing machine generating tensile strength and load at maximum Load values, which were statistically analyzed and compared. These two parameters have been associated with the frictional resistance generated at the archwire–bracket slot interface. Statistically significant results were obtained when comparing the active self-ligating brackets with the passive self-ligating (tensile strength mean 1.953, SD 0.4231; load at maximum moad mean 6.000, SD 1.3000) and conventional brackets (tensile strength mean 1.953, SD 0.4231; load at maximum load mean 6.000, SD 1.3000), as well as when comparing the passive self-ligating brackets with the conventional brackets (tensile strength mean 1.708, SD 0.8628; load at maximum load mean 5.254, SD 2.645). The active self-ligating brackets tended to produce more friction when compared to the passive self-ligating brackets but were similar to conventional brackets with stainless steel ligatures.
Adhesion remains a key element in dentistry, whether approached in prosthetics, odontology, or orthodontics. It is a continuously researched aspect, as improved materials and adhesive methods keep emerging in the market. No orthodontic treatment can be effective without the proper adhesion strength of the bonded elements on the teeth. The objective of this research, in the broad context of self-ligating versus conventional brackets, was to compare active and passive self-ligating systems with a conventional one by conducting an in vitro study on human-extracted premolars. Shear bond strength tests were executed by means of an advanced materials-testing machine that generated maximum load and tensile strength values. The data obtained underwent statistical analysis with a statistical threshold of p < 0.05. The results regarding the statistical significance were acquired when comparing the passive self-ligating system with the active self-ligating and conventional systems (load-at-maximum-load mean 204.9, SD 91.09, and p < 0.05). In this study, the passive self-ligating bracket system appears to present increased shear bond strength.
Background and Objectives: Corticotomy-facilitated orthodontics is an approach that can be useful in treating complex orthodontic cases and that could enhance the rate of tooth movement. The aim of this study was to evaluate the changes that occurred in the buccal cortical bone and at the root level after an orthodontic treatment when corticotomy was used, in Romanian patients. Materials and Methods: After dividing the subjects into two groups (maxillary and mandibular corticotomy), based on CBCT, measurements were made of the thickness of the cortical buccal bone at the cervical, median and apical level, and of the root length at T0 (before corticotomy) and T1 (6 months after surgery). Several tests were used for statistical analysis of the data. Results: In the maxillary arch, the bone thickness measured after corticotomy in males was 0.64 mm at the cervical level, 0.53 mm at the medial level and 0.30 mm in the apical area. In females, the values were 0.46 mm (cervical), 0.37 mm (medial) and 0.36 mm (apical). In the lower arch, the values obtained for these three regions were 0.37 mm, 0.30 mm and 0.37 mm for males and 0.58 mm, 0.32 mm and 0.43 mm for female subjects. All values were statistically significant. The root length for the lower teeth at T0 was 11.98 ± 2.24 mm at T0 and 11.97 ± 2.24 mm at T1. For the upper teeth, the root length at T0 was 13.83 ± 2.28 mm and 13.81 ± 2.28 mm. Conclusions: Comparing the measurements, it was observed that the biggest changes in the cortical bone were at the cervical level. In the maxillary arch, the most significant modifications were registered at the canines and the level of the first premolars, and in the lower arch at the incisors level. The measured root resorption of the teeth was considered to be statistically insignificant.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.