International audienceA self-consistent model for non-partitioning planar ferrite growth from alloyed austenite is presented. The model captures the evolution with time of interfacial contact conditions for substitutional and interstitial solutes. Substitutional element solute drag is evaluated in terms of the dissipation of free energy within the interface, and an estimate is provided for the rate of buildup of the alloying element "spike" in austenite. The transport of the alloying elements within the interface region is modeled using a discrete-jump model, while the bulk diffusion of C is treated using a standard continuum treatment. The model is validated against ferrite precipitation and decarburization kinetics in the Fe-Ni-C, Fe-Mn-C, and Fe-Mo-C systems

No abstract

International audienceThe kinetics of ferrite growth in the Fe-C-Co and Fe-C-Si systems has been quantified using controlled decarburization experiments. The Fe-C-Co system is a particularly interesting system since a large range of Co contents can be considered providing a suitable data set for examination of the composition dependence of the solute drag effect. Six Fe-C-Co alloys containing Co from 0.5 to 20 pct have been considered. Three Fe-C-Si alloys have also been considered and each has been transformed at three temperatures proving a suitable data set for examining the temperature dependence of the solute drag effect. This data set, along with ferrite growth data from decarburization experiments on an Fe-C-2Cr alloy has been used to test the ferrite growth model proposed in the companion article by Zurob et al. It is shown that this model for ferrite growth, that includes diffusional dissipation due to interaction between the solute and the migrating boundary, quantitatively captures both the temperature and composition dependence of the deviation of experimental ferrite growth kinetics from the PE and/or LENP models

International audienceThe segregation of solutes to austenite/ferrite transformation interfaces during decarburization/denitriding of Fe-Mn-C, Fe-Mn-N, and Fe-Si-C ternary alloys was studied by using atom probe tomography. Manganese was found to segregate noticeably to the transformation interface in the presence of carbon, while no segregation could be detected in the presence of nitrogen. This result might indicate that manganese interacts little with the interface itself and that its interaction with the interstitial controls its segregation behavior. In the case of Fe-Si-C, the experiments were complicated by interface motion during quenching. Preliminary results suggest that silicon was depleted at the interface in contrast to the commonly observed segregation behavior of silicon at grain boundaries of ferrite and austenite. This observation could be explained by taking into account the repulsive interaction between silicon and carbon along with the intense segregation of carbon to the interface. This would lead to a net repulsive interaction of silicon with the interface even when considering the intrinsic tendency of silicon to segregate to the boundary in the absence of carbon. The results presented here emphasize the need to account for the interaction of all solutes present at the interface in ferrite growth models

No abstract