A SiC dry etcher using chlorine trifluoride (ClF3) gas was evaluated, particularly about the etching rate distribution. At 100%, the etching rate was high in the center region and was low in the outer region. However, that at 20% showed the opposite profile. This difference was considered to be due to the chlorine trifluoride gas distribution which was built above the gas distributor.
A SiC dry etching reactor using chlorine trifluoride (ClF3) gas was designed and evaluated with the help of numerical calculations and experimental results. The etching rate was about 16 μm/min when the ClF3 gas concentration, the total flow rate and the SiC substrate temperature were 90%, 0.3 slm and 500 °C, respectively. The gas stream above the substrate surface was concluded to significantly affect the etching rate profile.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.