A series of N-doped carbon materials (NCs) were synthesized by using biomass citric acid and dicyandiamide as renewable raw materials via a facile one-step pyrolysis method. The characterization of microstructural features shows that the NCs samples are composed of few-layered graphene-like nanoflakes with controlled in situ N doping, which is attributed to the confined pyrolysis of citric acid within the interlayers of the dicyandiamide-derived g-C3N4 with high nitrogen contents. Evidently, the pore volumes of the NCs increased with the increasing content of dicyandiamide in the precursor. Among these samples, the NCs nanoflakes prepared with the citric acid/dicyandiamide mass ratio of 1:6, NC-6, show the highest N content of ~6.2 at%, in which pyridinic and graphitic N groups are predominant. Compared to the commercial Pt/C catalyst, the as-prepared NC-6 exhibits a small negative shift of ~66 mV at the half-wave potential, demonstrating excellent electrocatalytic activity in the oxygen reduction reaction. Moreover, NC-6 also shows better long-term stability and resistance to methanol crossover compared to Pt/C. The efficient and stable performance are attributed to the graphene-like microstructure and high content of pyridinic and graphitic doped nitrogen in the sample, which creates more active sites as well as facilitating charge transfer due to the close four-electron reaction pathway. The superior electrocatalytic activity coupled with the facile synthetic method presents a new pathway to cost-effective electrocatalysts for practical fuel cells or metal–air batteries.

In this study, a series of activated N-doped porous carbon spheres (ANCSs) have been prepared from biomass as the carbon source to be used as highly active and stable electrocatalysts toward the electrocatalytic oxygen reduction reaction (ORR). Hydrothermal carbonization of biomass glucose, which obtains uniform carbon nanopsheres, is followed by doping N atoms by treatment in ammonia and subsequent activation treatment to form ANCSs. The resultant ANCSs possess a large specific surface area of up to 2813 m2/g and pore volume of up to 1.384 cm3/g, and adjustable N contents (2.38–4.53 atom %) with increasing activation temperature. The graphitic and pyridinic-N groups dominate in various N functional groups in the ANCSs. Remarkably, the 1000 °C-activated sample demonstrates competitive activity and outstanding stability and methanol crossover toward the ORR with a four-electron transfer pathway in alkaline media compared to commercial Pt/C catalyst. This excellent performance should be mainly due to effective N-doping and high porosity which can boost the mass transfer and charge transfer and provide a larger number of active sites for the ORR. The unique spherical morphologies with improved porosity as well as excellent stability and recyclability make these ANCSs among the most promising ORR electrocatalysts in practical applications.

No abstract

No abstract

No abstract