No abstract

Articles you may be interested in A sensitive film structure improvement of reduced graphene oxide based resistive gas sensors Appl. Phys. Lett. 105, 033502 (2014); 10.1063/1.4890843 A calibrated graphene-based chemi-sensor for sub parts-per-million NO2 detection operating at room temperature Appl. Phys. Lett.

Surface acoustic wave ͑SAW͒ devices were fabricated on ZnO thin films deposited on Si substrates. Effects of ZnO film thickness on the wave mode and resonant frequency of the SAWs have been investigated. Rayleigh and Sezawa waves were detected, and their resonant frequencies decrease with increase in film thickness. The Sezawa wave has much higher acoustic velocity and larger signal amplitude than those of Rayleigh mode wave. Acoustic streaming for mixing has been realized in piezoelectric thin film SAWs. The Sezawa wave has a much better efficiency in streaming, and thus is very promising for application in microfluidics.

We have proposed a novel mobile healthcare platform, combining a pocket-sized colorimetric reader (13.5 × 6.5 × 2.5 cm(3)) and commercially available 10-parameter urinalysis paper strips (glucose, protein, glucose, bilirubin, urobilinogen, ketones, nitrite, pH, specific gravity, erythrocytes, and leukocytes), capable of sending data with a smart phone. The reader includes a novel colorimetric multi-detection module, which consists of three-chromatic light-emitting diodes, silicon photodiodes and a novel poly(methylmethacrylate) (PMMA) optical splitter. We employed data reading methods using conversions of the signal data (red, blue, and green) to the hue (H) color map or the Y model data, and used a curve-fitting method for the quantification. The reader is battery-powered, inexpensive, light-weight, and very speedy in analysis. And, it was applied to detection of a thousand of human urine samples and demonstrated reliable quantification of urinary glucose and protein. The features can be used by unskilled people on-site to transfer the analyzed data to experts off-site.

This paper provides a detailed study on surface acoustic wave (SAW) induced acoustic streaming and pumping, focusing on the effects of the wave mode and surface modification. SAW devices with wavelengths of 32 and 64 µm were fabricated on 128° Y-cut lithium niobate substrates with aluminium interdigitated transducers. A higher order harmonic mode wave appears in addition to the fundamental Rayleigh wave for samples with metallization ratios less than 0.6. Both waves have demonstrated the ability to induce acoustic streaming and to pump liquid. A high streaming velocity, and hence a high mixing efficiency and a higher acoustic force, can be obtained using the fundamental Rayleigh wave as the high harmonic waves have large propagation losses. A linear relationship between the streaming velocity and RF signal voltage has been obtained, and effective mixing can be achieved. An acoustic wave has also been utilized to manipulate and pump droplets with sizes up to 5 µl, and a moving speed of ∼1.4 cm s−1 has been obtained on an octadecyltrichlorosilane-treated SAW device using a signal voltage of 40 V.