A study has been carried out to correlate the wet fastness properties of dyed knitted fabrics, derived from both poly(ethylene terephthalate) and poly(lactic acid) (Ingeo) fibres, with the thermal migration properties of the disperse dyes during heat treatment. The results indicate a greater amount of disperse dye at the surface of the Ingeo fibre fabric than the poly(ethylene terephthalate) fabric, after post heat‐setting using the conditions needed for fabric stabilisation, correlating well with its slightly lower wash fastness properties.

A study has been conducted into the effect of heat setting on the dimensional stability and dyeing properties of spun and false‐twist texturised poly(lactic acid) yarn. It has been shown that acceptable levels of dimensional stability can be achieved after heat setting for 30–45 s at 130 °C, false‐twist texturised yarn exhibiting greater shrinkage than spun yarn. The exhaustion level and visual colour yield of a number of disperse dyes have been evaluated on each type of poly(lactic acid) yarn and shown to be essentially independent of the time of heat setting.

Regenerated cellulosic fibres undergo a process described as scission-reordering during hydrolysis in solutions of mineral acid. This occurs within disordered polymer regions at lateral crystal interfaces, which are accessible to aqueous agents through the pore spaces and polymer free volume. This process is distinct from that of oligomersolubilsation, which occurs within disordered polymer regions in series between crystal domains, where no effective template exists for recrystallisation. The degradation of series disorder will have the greatest influence on fibre tensile properties, which fall dramatically even at low levels of hydrolysis. The mechanics of fibrillation are most sensitive to the degradation of lateral disorder, which occurs at a higher rate constant. Soft-touch fabric processing may therefore be possible under conditions where there is a reduced influence on tensile performance. A kinetic model has been proposed to describe the hydrolysis and recrystallisation pathways, which shows that lyocell has longer but thinner crystal domains than viscose or modal fibres, and also a tighter distribution of lateral crystal sizes. Lyocell also has a lower proportion of series disorder and also thinner regions of lateral disorder. This is consistent with the overall greater crystallinity of the original lyocell fibre and the also of the final microscrystalline product.

No abstract

Administration of dilute vasopressin solution (0.05 U/mL) to the cervical stroma significantly reduces blood loss, distention fluid intravasation, and operative time during hysteroscopy. Further evaluation is required to determine the optimum dosage.