An investigation of the properties of the plasma and the electron beam produced by velvet cathodes in a diode powered by a ∼200kV, ∼300ns pulse is presented. Spectroscopic measurements demonstrated that the source of the electrons is surface plasma with electron density and temperature of ∼4×1014cm−3 and ∼7eV, respectively, for an electron current density of ∼50A∕cm2. At the beginning of the accelerating pulse, the plasma expands at a velocity of ∼106cm∕s towards the anode for a few millimeters, where its stoppage occurs. It was shown by optical and x-ray diagnostics that in spite of the individual character and nonuniform cross-sectional distribution of the cathode plasma sources, the uniformity of the extracted electron beam is satisfactory. A mechanism controlling the electron current-density cross-sectional uniformity is suggested. This mechanism is based on a fast radial plasma expansion towards the center due to a magnetic-field radial gradient. Finally, it was shown that the interaction of the electron beam with the stainless-steel anode does not lead to the formation of an anode plasma.

Flexible thermoelectric generators (TEGs) can provide uninterrupted, green energy from body-heat, overcoming bulky battery configurations that limit the wearable-technologies market today. High-throughput production of flexible TEGs is currently dominated by printing techniques, limiting material choices and performance. This work investigates the compatibility of physical vapour deposition (PVD) techniques with a flexible commercial process, roll-to-roll (R2R), for thermoelectric applications. We demonstrate, on a flexible polyimide substrate, a sputtered Bi2Te3/GeTe TEG with Seebeck coefficient (S) of 140 μV/K per pair and output power (P) of 0.4 nW per pair for a 20 °C temperature difference. For the first time, thermoelectric properties of R2R sputtered Bi2Te3 films are reported and we demonstrate the ability to tune the power factor by lowering run times, lending itself to a high-speed low-cost process. To further illustrate this high-rate PVD/R2R compatibility, we fabricate a TEG using Virtual Cathode Deposition (VCD), a novel high deposition rate PVD tool, for the first time. This Bi2Te3/Bi0.5Sb1.5Te3 TEG exhibits S = 250 μV/K per pair and P = 0.2 nW per pair for a 20 °C temperature difference.

There is a continuous interest in research of electron sources which can be used for generation of uniform electron beams produced at E≤105 V/cm and duration ≤10−5 s. In this review, several types of plasma electron sources will be considered, namely, passive (metal ceramic, velvet and carbon fiber with and without CsI coating, and multicapillary and multislot cathodes) and active (ferroelectric and hollow anodes) plasma sources. The operation of passive sources is governed by the formation of flashover plasma whose parameters depend on the amplitude and rise time of the accelerating electric field. In the case of ferroelectric and hollow-anode plasma sources the plasma parameters are controlled by the driving pulse and discharge current, respectively. Using different time- and space-resolved electrical, optical, spectroscopical, Thomson scattering and x-ray diagnostics, the parameters of the plasma and generated electron beam were characterized.

A method for controlling the optical properties of a solid-state film over a broad wavelength range is highly desirable and could have significant commercial impact. One such application is smart glazing technology where near-infrared solar radiation is harvested in the winter and reflected it in the summeran impossibility for materials with fixed thermal and optical properties. Here, we experimentally demonstrate the first spectrally tunable, low-emissivity coating using a chalcogenidebased phase-change material (Ge 20 Te 80 ), which can modulate the solar heat gain of a window while maintaining neutral-coloration and constant transmission of light at visible wavelengths. We additionally demonstrate the controlled transfer of absorbed nearinfrared energy to far-infrared radiation, which can be used to heat a building's interior and show fast, sub-millisecond switching using transparent electrical heaters integrated on glass substrates. These combined properties result in a smart window that is efficient and aesthetically pleasingcrucial for successful adoption of green technology.

Results of optical and spectroscopic studies of the plasma formation at the surface of two types of carbon-fiber cathodes in a diode powered by an ∼200 kV accelerating pulse are presented. It was found that during the pulse, generation of the plasma occurs in a form of several millimeter size plasma spots. In the vicinity of the cathode surface the average plasma density and temperature were found to be ∼3×1014 cm−3 and ∼5 eV, respectively, for an electron current density of ∼22 A/cm2. The plasma expansion velocity toward the anode was found to be ∼1.5×106 cm/s during the first 150 ns of the accelerating pulse duration.