The forward swept blades are expected to reduce the accumulation of boundary layer fluid resulting from the effect of centrifugal forces, near the tip region of an axial flow impeller blade. An experimental study was carried out on three sets of impeller blades with different forward sweep, keeping the blade element profile geometry the same. It is seen from the comparison of the overall performance of the impellers with swept and unswept blades that the swept blades operate more efficiently than the unswept blades, especially at low volume flows. Moreover, the blade element stall is delayed, if the blades are swept forward. An analysis of the experimental results shows that forward sweep effectively reduces the deteriorating effects of the radially outward boundary layer flow in the tip region.
The flow from a small forward curved fan rotor was studied to provide guidance for fan design. The single width fan had a 0.23 m rotor containing 48 blades. It is typical of the centrifugal fans used in small air-conditioning units. Visualization techniques and hot wire measurements showed the rotor flow to be highly turbulent and strongly three-dimensional. The inlet flow was found to fill only 3/4 of the blade span. The shroud end of the rotor was an inactive or separated region. A jet-wake pattern occurred at the blade exit in the active flow region. The inlet flow separated at the leading edge of the blade suction surface. Design changes are offered to improve the performance of FC fans.
This paper presents the results of experimental investigations on the three-dimensional flow and performance characteristics of a free vortex axial flow fan rotor, with a freely rotating and braked inlet guide vane row. The influences of axial distance between the inlet guide vane row and the rotor inlet, inlet guide vane setting angle and shape, partial omission of guide vanes at the hub and tip regions on the return flows have been studied and optimum axial distance and setting angle that will improve the useful operating range of the fan were determined. Use of freely rotating inlet guide vanes at high flow volumes and braked inlet guide vanes at low flow coefficients resulted in a reduction of return flows and an increase of the stable operating range of the axial fan rotor by more than 35 percent and this combination has yielded higher efficiencies as well in the extended region of stable operation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.