Intracavity semiconductor saturable absorber mirrors (SESAM's) offer unique and exciting possibilities for passively pulsed solid-state laser systems, extending from Q-switched pulses in the nanosecond and picosecond regime to mode-locked pulses from 10's of picoseconds to sub-10 fs. This paper reviews the design requirements of SESAM's for stable pulse generation in both the mode-locked and Q-switched regime. The combination of device structure and material parameters for SESAM's provide sufficient design freedom to choose key parameters such as recovery time, saturation intensity, and saturation fluence, in a compact structure with low insertion loss. We have been able to demonstrate, for example, passive modelocking (with no Qswitching) using an intracavity saturable absorber in solid-state lasers with long upper state lifetimes (e.g., 1-m neodymium transitions), Kerr lens modelocking assisted with pulsewidths as short as 6.5 fs from a Ti:sapphire laser-the shortest pulses ever produced directly out of a laser without any external pulse compression, and passive Q-switching with pulses as short as 56 ps-the shortest pulses ever produced directly from a Qswitched solid-state laser. Diode-pumping of such lasers is leading to practical, real-world ultrafast sources, and we will review results on diode-pumped Cr:LiSAF, Nd:glass, Yb:YAG, Nd:YAG, Nd:YLF, Nd:LSB, and Nd:YVO 4. I. HISTORICAL BACKGROUND AND INTRODUCTION A.
The signal and idler beams from a picosecond, synchronously pumped optical parametric oscillator (OPO) provide the two colors necessary for coherent anti-Stokes Raman scattering (CARS) microscopy. The OPO provides a continuously tunable frequency difference between the two beams over a broad range of Raman shifts (100-3700 cm(-1)) by varying the temperature of a single nonlinear crystal. The near-infrared output (900-1300 nm) allows for deep penetration into thick samples and reduced nonlinear photodamage. Applications of this light source to in vivo cell and ex vivo tissue imaging are demonstrated.
Laser action is demonstrated in a 20-mm-long waveguide fabricated on an Er:Yb-doped phosphate glass by femtosecond laser pulses. An output power of 1.7 mW with approximately 300 mW of pump power coupled into the waveguide is obtained at 1533.5 nm. Waveguides are manufactured with the 520-nm radiation from a frequency-doubled, diode-pumped, cavity-dumped Yb:glass laser operating at a 166-KHz repetition rate, with a 300-fs pulse duration.
We have developed a diode-pumped Yb(3+)Sr(3)Y(BO(3))(3) (Yb:BOYS) laser generating 69-fs pulses, at a central wavelength of 1062 nm. This laser is mode locked by use of a semiconductor saturable-absorber mirror and emits 80 mW of average power at 113 MHz. This is, to our knowledge, the first mode-locked Yb:BOYS laser and the shortest duration obtained from an ytterbium laser with a crystalline host. The central wavelength can be tuned from 1051 to 1070 nm, for sub-100-fs pulses. We have also achieved an average power as high as 300 mW with pulse duration of 86 fs at 1068 nm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.