In order to develop a low pressure desalination membrane with fixed ionic charges, we made use of the normally unwanted crosslinking tendency in preparing the polyelectrolyte poly(styrenesulfonate) by sulfonation of polystyrene. After dipcoating a poly(sulfone) or poly(phenylene oxide) L'F membrane with a dilute soluton of this polyelectrolyte in water in the presence of some free sulfuric acid and silver&fate, fixation and cross-linking of the coating polymer took place by a heat treatment. Different membrane properties could be obtained by varying the pore size of the supporting UF membranes, and by variation in the coating polymer (Pvl.W., concentration) and sulfuric acid concentration. We found that fluxes sometimes decline drastically in comparison with the original pure water flux; salt rejection values (at 1.5 g/l NaCl concentration and 0.5 MPa) never are very high (<60% for monovalent anions). The most important potential application for these membranes lies in their non-fouling properties. *Presented at the Third Symposium on Synthetic Membranes in Science and Industry,
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.