No abstract

No abstract

Q\STRIBUTION OF THIS DOCUMENT is UNLtMlTED DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility forthe accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

This data package provides recommendations for waste form physical and chemical properties to support the initial analysis of Solid Secondary Waste (SSW) disposals in the 2017 Integrated Disposal Facility (IDF) Performance Assessment (PA). At this time, specific formulations have not been identified for cementitious materials that will be used to encapsulate or solidify SSW, and no IDF-specific experiments were conducted to obtain data for the PA. Thus recommended property values are provided for a range of candidate materials, and based on a review of existing literature. Four key SSW streams were identified for emphasis due to expected inventories for contaminants of potential concern (COPC): HEPA filters, ion exchange resins, carbon adsorber beds and Ag-mordenite. Based on current disposal plans, compacted HEPA filters were considered as an encapsulated waste form and the other three key waste streams were assumed to be blended and solidified in a cementitious matrix. Considerations for alternative disposal methods were also addressed. The IDF PA team identified specific COPCs expected to be the key contributors for the PA calculations: Tc-99, I-129, Cs-137, Sr-90, uranium isotopes (and total uranium), chromium, mercury and nitrate. These species are the focus of this data package.