No abstract

No abstract

No abstract

The science of microwaves owes its origin to the development of radar. Microwaves are part of electromagnetic spectrum. This field became vitally important as man reached out to space. Frequency range of these waves are from 3 GHz to 30 GHz. Microwaves have unique capabilities in remote sensing. The field of microwaves remote sensing has come to a stage of rapid growth. Microwaves can penetrate clouds and so the sensors can operate in all weather conditions. They are sensitive to the presence of moisture in the soil as well as in vegetation or any another material which absorbs moisture. Microwave sensors are of two types: active sensors and passive sensors. Passive sensors have been used for soil studies for the determination of moisture content, oceanographic application to determine winds over the ocean surface and water vapor content in atmosphere as well as liquid water content in clouds. Soils are composed of solids, liquids and gases mix in variable proportions. Soil texture depends upon the size of the particle and structure of soil depends on the way particles are arranged. Soil has physical as well as electrical properties. Colour, texture, grain soil etc. comprised the physical properties where the electrical properties include dielectric constant, conductivity and permeability. Dielectric constant is the primary electrical property which is used to estimate emissivity and brightness temperature of soil. Emissivity is an important parameter for microwave remote sensing, which provides information about soils. All substances at a finite absolute temperature radiate electromagnetic energy. Emissivity is the ratio of energy emitted by object to black body maintained at same physical temperature. Emissivity is a function of physical and electrical parameters of the object and electrical parameter of sensors. These are the moisture content in the object surface type (smooth or rough), dielectric constant (£), angle of incidence, polarization. Emissivity can be obtained from the measured dielectric constant (£) using the available models. The emissivity can be measured by instrument radiometer, which is highly sensitive receiver. Radiometers are passive microwave sensor, which collects the incoming radiations, amplify as well as process the signal, and gives the output, which is linearly related to incoming radiation collected by antenna. The electromagnetic radiations are measured by passive remote sensor in the form of brightness temperature. The radiometer system used here consists of LNBC, receiver and power meter. The LNBC (low noise block down converter) converts the signal to a lower frequency and 978-1-4244-2690-4444/08/$25.00©2008 IEEE 621 sends them out to the cable connector, which is connected to satellite receiver via co-axial cable. LNBC have input frequency range 10.75 to 12.75 GHz and noise temperature of 35 oK. The receiver output is connected to microwave power meter. The power monitored is related to incoming e m radiations. The radiometer is calibrated using Liquid Nitrogen and sky as t...

No abstract

GeO 2 +P 2 O 5 co-doped step index multimode (SIMM) fiber having core diameter around 50 micron with numerical aperture around 0.21-0.22 proposed for the first time shows an excellent linear radiation response behaviour with sensitivity around 0.69-0.97 dB/m/100 rad at 505nm wavelength within the dose rates of 10-100 rad/hr as well as very low recovery at room temperature using 60 Co gamma radiation source. This enables its practical application in fiber optic personal dosimeter for measurement of low dose gamma radiation.

No abstract

No abstract