This article ls with the issues related to the development of a system for monitoring the deformation and displacement of the rock mass leading to the collapse of the quarry sides. Monitoring system uses point-to-point fiber-optic sensors. Fiber-optic sensors and control cables of the communication line are made based on the single mode optical fibers, which allows to measure with high accuracy the deformations and displacements of the rock mass at a distance of 30-50 km. To create fiber-optic pressure sensors, an optical fiber of the ITU-T G. 652.D standard is used. Laboratory sample is developed concerning the point fiber-optic sensor made based on the two-arm Mach-Zender interferometer using a single mode optical fiber for monitoring strain (displacements) with a change in the sensitivity and a reduced influence of temperature interference leading to zero drift. The article presents a mathematical apparatus for calculating the intensity of radiation of a light wave passing through an optical fiber with and without mechanical stress. A laboratory sample of single mode optical fibers based on the Mach-Zender interferometer showed a fairly high linearity and accuracy in the measurement and can be used to control the strain of the mass after appropriate refinement of its design. Mathematical expressions are also given for determining the intensity of the light wave when the distance between the fixing points of a single mode optical fiber changes depending on the change in the external temperature. A diagram for measuring strain using a point fiber-optic strain sensor is developed. Hardware and software package is developed, which can be used to perform a number of settings of measuring channels. The work is aimed at solving the production problems of the Kenzhem quarry of AK Altynalmas JSC.
Research on fiber-optic displacement sensors in quarries is the main cause of the collapse of the sides of the quarry. To ensure safety and constant monitoring during the work at the quarry, sharpened fiber-optic sensors are used. Fiber-optic sensors and control cables of the communication line are made on the basis of single-mode optical fibers, which makes it possible to measure deformations and displacements of the mountain range at distances of 30-50 km with high accuracy. Optical fiber of the ITU-T G. 652.D standard is used to create fiber-optic pressure sensors (FOS). All tests were carried out in the laboratory. This article is a sample for studying the entire process of deformation and displacement of the mountain range. In the end, the results of the study will help to optimize the work at the quarry and prevent accidents
This article discusses the use of laser scanning to monitor the state of the near-side array in the open pit «Karakomir». Obtaining a three-dimensional model and identifying linear deformations on it, the angle of inclination of the ledges in the area of landslides.
The paper considers ways to solve the problem of developing a system for monitoring displacement in quarries, which are the main main cause of the collapse of boards and berms in quarries. To ensure safety and constant monitoring during work at the quarry, there are chiseled fiber-optic sensors. The fiber-optic sensor is made on the basis of a single-mode optical fiber, which makes it possible to measure the displacements of the mountain range at distances of about 30 km with high accuracy. Laboratory sample a fiber-optic sensor in its work uses a method for monitoring additional losses that occur during mechanical action on an optical fiber. The fiber-optic sensor was made to show a fairly high linearity and accuracy during measurements and can be used to control the deformation of the array after appropriate refinement of its design. This article is aimed at creating means of controlling the process of deformation and displacement of a mountain massif. Ultimately, the results of the study will help prevent accidents associated with the collapse of the sides. Since the growth of cracks in the rocks of the bort mountain massif leads to its sudden collapse and creates a significant danger for personnel, it also causes the failure of mining equipment.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.