Quantitative magneto-optical imaging of a type-II superconductor thin film cooled under zero, homogeneous, and inhomogeneous applied magnetic fields indicates that the latter procedure leads to an enhancement of the screening capacity. Such an observation is corroborated by both B-independent and B-dependent critical state model analyses. Furthermore, repulsive (attractive) vortex-(anti)vortex interactions were found to have a decisive role in the shielding ability, with initial states prepared with vortices resulting in a shorter magnetic flux front penetration depth than those prepared with antivortices. The proposed strategy could be implemented to boost the performance of thin superconducting devices.

Granularity is one of the main features restricting the maximum current which a superconductor can carry without losses, persisting as an important research topic when applications are concerned. To directly observe its effects on a typical thin superconducting specimen, we have modeled the simplest possible granular system by fabricating a single artificial weak-link in the center of a high-quality Nb film using the focused ion beam technique. Then, its microstructural, magnetic, and electric properties in both normal and superconducting states were studied. AC susceptibility, DC magnetization, and magneto-transport measurements reveal well-known granularity signatures and how they negatively affect superconductivity. Moreover, we also investigate the normal state electron scattering mechanisms in the Boltzmann theory framework. The results clearly demonstrate the effect of the milling technique, giving rise to an additional quadratic-in-temperature contribution to the usual cubic-in-temperature sd band scattering for the Nb film. Finally, by analyzing samples with varying density of incorporated defects, the emergence of the additional contribution is correlated to a decrease in their critical temperature, in agreement with recent theoretical results.

Although the production of YBa2Cu3O7-δ (Y123) has been extensively reported, there is still a lack of information on the ideal heat treatment to produce this material in the form of one dimension nanostructures. Thus, by means of the Solution Blow Spinning technique, metals embedded in polymer fibers were prepared. These polymer composite fibers were fired and then investigated by thermogravimetric analysis. The maximum sintering temperatures of heat treatment were chosen in the interval 850 °C–925 °C for 1 h under oxygen flux. SEM images allowed us to determine the wire diameter as approximately 350 nm for all samples, as well as to map the evolution of the entangled wire morphology with the sintering temperature. XRD analysis indicated the presence of Y123 and secondary phases in all samples. Ac magnetic susceptibility and dc magnetization measurements demonstrated that the sample sintered at 925 °C/1 h is the one with the highest weak-link critical temperature and the largest diamagnetic response.

No abstract

No abstract