The backbone dynamics of the C-terminal SH2 domain of phospholipase C gamma 1 have been investigated. Two forms of the domain were studied, one in complex with a high-affinity binding peptide derived from the platelet-derived growth factor receptor and the other in the absence of this peptide. 2-D 1H-15N NMR methods, employing pulsed field gradients, were used to determine steady-state 1H-15N NOE values and T1 and T2 15N relaxation times. Backbone dynamics were characterized by the overall correlation time (tau m), order parameters (S2), effective correlation times for internal motions (tau e), and, if required, terms to account for motions on a microsecond-to-millisecond-time scale. An extended two-time-scale formalism was used for residues having relaxation data and that could not be fit adequately using a single-time-scale formalism. The overall correlation times of the uncomplexed and complexed forms of SH2 were found to be 9.2 and 6.5 ns, respectively, suggesting that the uncomplexed form is in a monomer-dimer equilibrium. This was subsequently confirmed by hydrodynamic measurements. Analysis of order parameters reveals that residues in the so-called phosphotyrosine-binding loop exhibited higher than average disorder in both forms of SH2. Although localized differences in order parameters were observed between the uncomplexed and complexed forms of SH2, overall, higher order parameters were not found in the peptide-bound form, indicating that on average, picosecond-time-scale disorder is not reduced upon binding peptide. The relaxation data of the SH2-phosphopeptide complex were fit with fewer exchange terms than the uncomplexed form. This may reflect the monomer-dimer equilibrium that exists in the uncomplexed form or may indicate that the complexed form has lower conformational flexibility on a microsecond-to-millisecond-time scale.

A series of polypeptides containing 9, 12, 16, 19, 23, 26, 30, 33, and 35 amino acid residues was designed to investigate the effects of peptide chain length on the formation and stability of two-stranded alpha-helical dimers or coiled coils. These peptides were synthesized by the solid-phase method, purified by reversed-phase high-performance liquid chromatography (RP-HPLC), and characterized by RP-HPLC, amino acid composition analysis, and mass spectrometry. The amphipathic alpha-helical peptides were designed to dimerize by interchain hydrophobic interactions at positions a and d and interchain salt bridges between lysine and glutamic acid residues at positions e and g of the repeating heptad sequence of Glu-Ile-Glu-Ala-Leu-Lys-Ala (g-a-b-c-d-e-f). The ability of these peptides to form alpha-helical structures in the presence and absence of a helix-inducing reagent (trifluoroethanol) was monitored by circular dichroism spectroscopy. The helicity of the peptides increased with increasing chain length in a cooperative manner. A minimum of three heptads corresponding to six helical turns was required for a peptide to adopt the two-stranded alpha-helical coiled coil conformation in aqueous medium. The increased stability of the peptides as a result of an increase in hydrophobic interactions (chain length) was demonstrated by the shift in the transitions of the guanidine hydrochloride (Gdn.HCl) denaturation and thermal unfolding profiles. The concentrations of denaturant (Gdn.HCl) required to achieve 50% denaturation are 3.2, 4.9, 6.9, and 7.5 M for peptides 23r, 26r, 30r, and 33r, respectively, in aqueous medium. However, the effect of a chain length increase on coiled-coil stability was not additive. The melting temperature, Tm, at which 50% of the helicity is lost, increased by 34 degrees C in changing the peptide chain length from 23 to 26; however, that shift was only 14 degrees C when the chain length was increased from 30 to 33 residues. These results are consistent with a chain length dependent cooperative folding of the peptides into coiled coils.

The aim of the present investigation is to determine the effect of alpha-helical propensity and sidechain hydrophobicity on the stability of amphipathic alpha-helices. Accordingly, a series of 18-residue amphipathic alpha-helical peptides has been synthesized as a model system where all 20 amino acid residues were substituted on the hydrophobic face of the amphipathic alpha-helix. In these experiments, all three parameters (sidechain hydrophobicity, alpha-helical propensity and helix stability) were measured on the same set of peptide analogues. For these peptide analogues that differ by only one amino acid residue, there was a 0.96 kcal/mole difference in alpha-helical propensity between the most (Ala) and the least (Gly) alpha-helical analogue, a 12.1-minute difference between the most (Phe) and the least (Asp) retentive analogue on the reversed-phase column, and a 32.3 degrees C difference in melting temperatures between the most (Leu) and the least (Asp) stable analogue. The results show that the hydrophobicity and alpha-helical propensity of an amino acid sidechain are not correlated with each other, but each contributes to the stability of the amphipathic alpha-helix. More importantly, the combined effects of alpha-helical propensity and sidechain hydrophobicity at a ratio of about 2:1 had optimal correlation with alpha-helix stability. These results suggest that both alpha-helical propensity and sidechain hydrophobicity should be taken into consideration in the design of alpha-helical proteins with the desired stability.

The objective of this study was to address the question of whether or not urea and guanidine hydrochloride (GdnHCI) give the same estimates of the stability of a particular protein. We previously suspected that the estimates of protein stability from GdnHCl and urea denaturation data might differ depending on the electrostatic interactions stabilizing the proteins. Therefore, 4 coiled-coil analogs were designed, where the number of intrachain and interchain electrostatic attractions Thus, GdnHCl and urea denaturations may give vastly different estimates of protein stability, depending on how important electrostatic interactions are to the protein.

We have investigated the role of amphipathicity in a homologous series of head-to-tail cyclic antimicrobial peptides in efforts to delineate features resulting in high antimicrobial activity coupled with low hemolytic activity (i.e. a high therapeutic index). The peptide GS14, cyclo(VKLKVd-YPLKVKLd-YP), designed on the basis of gramicidin S (GS), exists in a preformed highly amphipathic ␤-sheet conformation and was used as the base compound for this study. Fourteen diastereomers of GS14 were synthesized; each contained a different single enantiomeric substitution within the framework of GS14. The ␤-sheet structure of all GS14 diastereomers was disrupted as determined by CD and NMR spectroscopy under aqueous conditions; however, all diastereomers exhibited differential structure inducibility in hydrophobic environments. Because the diastereomers all have the same composition, sequence, and intrinsic hydrophobicity, the amphipathicity of the diastereomers could be ranked based upon retention time from reversed-phase high performance liquid chromatography. There was a clear correlation showing that high amphipathicity resulted in high hemolytic activity and low antimicrobial activity in the diastereomers. The latter may be the result of increased affinity of highly amphipathic peptides to outer membrane components of Gram-negative microorganisms. The diastereomers possessing the most favorable therapeutic indices possessed some of the lowest amphipathicities, although there was a threshold value below which antimicrobial activity decreased. The best diastereomer exhibited 130-fold less hemolytic activity compared with GS14, as well as greatly increased antimicrobial activities, resulting in improvement in therapeutic indices of between 1,000-and 10,000-fold for a number of microorganisms. The therapeutic indices of this peptide were between 16-and 32-fold greater than GS for Gram-negative microorganisms and represents a significant improvement in specificity over GS. Our findings show that a highly amphipathic nature is not desirable in the design of constrained cyclic antimicrobial peptides and that an optimum amphipathicity can be defined by systematic enantiomeric substitutions.

We have evaluated the effect of ring size of gramicidin S analogs on secondary structure, lipid binding, lipid disruption, antibacterial and hemolytic activity. Cyclic analogs with ring sizes ranging from 4 to 14 residues were designed to maintain the amphipathic character as found in gramicidin S and synthesized by solid phase peptide synthesis. The secondary structure of these peptides showed a definite periodicity in ␤-sheet content, with rings containing 6, 10, and 14 residues exhibiting ␤-sheet structure, and rings containing 8 or 12 residues being largely disordered. Peptides containing 4 or 6 residues did not bind lipopolysaccharide, whereas longer peptides showed a trend of increasing binding affinity for lipopolysaccharide with increasing length. Destabilization of Escherichia coli outer membranes was only observed in peptides containing 10 or more residues. Peptides containing fewer than 10 residues were completely inactive and exhibited no hemolytic activity. The 10-residue peptide showed an activity profile similar to that of gramicidin S itself, with activity against Grampositive and Gram-negative microorganisms as well as yeast, but also showed high hemolytic activity. Differential activities were obtained by increasing the size of the ring to either 12 or 14 residues. The 14-residue peptide showed no antibiotic activity but exhibited increased hemolytic activity. The 12-residue peptide lost activity against Gram-positive bacteria, retained activity against Gram-negative microorganisms and yeast, but displayed decreased hemolytic activity. Biological activities in the 12-residue peptide were optimized by a series of substitutions in residues comprising both hydrophobic and basic sites resulting in a peptide that exhibited activities comparable with gramicidin S against Gramnegative microorganisms and yeast but with substantially lower hemolytic activity. Compared with gramicidin S, the best analog showed a 10-fold improvement in antibiotic specificity for Gram-negative microorganisms and a 7-fold improvement in specificity for yeast over human erythrocytes as determined by a therapeutic index. These results indicate that it is possible to modulate structure and activities of cyclic gramicidin S analogs by varying ring sizes and further show the potential for developing clinically useful antibiotics based on gramicidin S.

The extracellular homophilic-binding domain of the cadherins consists of 5 cadherin repeats (EC1–EC5). Studies on cadherin specificity have implicated the NH2-terminal EC1 domain in the homophilic binding interaction, but the roles of the other extracellular cadherin (EC) domains have not been evaluated. We have undertaken a systematic analysis of the binding properties of the entire cadherin extracellular domain and the contributions of the other EC domains to homophilic binding.Lateral (cis) dimerization of the extracellular domain is thought to be required for adhesive function. Sedimentation analysis of the soluble extracellular segment of C-cadherin revealed that it exists in a monomer–dimer equilibrium with an affinity constant of ∼64 μM. No higher order oligomers were detected, indicating that homophilic binding between cis-dimers is of significantly lower affinity.The homophilic binding properties of a series of deletion constructs, lacking successive or individual EC domains fused at the COOH terminus to an Fc domain, were analyzed using a bead aggregation assay and a cell attachment–based adhesion assay. A protein with only the first two NH2-terminal EC domains (CEC1-2Fc) exhibited very low activity compared with the entire extracellular domain (CEC1-5Fc), demonstrating that EC1 alone is not sufficient for effective homophilic binding. CEC1-3Fc exhibited high activity, but not as much as CEC1-4Fc or CEC1-5Fc. EC3 is not required for homophilic binding, however, since CEC1-2-4Fc and CEC1-2-4-5Fc exhibited high activity in both assays. These and experiments using additional EC combinations show that many, if not all, the EC domains contribute to the formation of the cadherin homophilic bond, and specific one-to-one interaction between particular EC domains may not be required. These conclusions are consistent with a previous study on direct molecular force measurements between cadherin ectodomains demonstrating multiple adhesive interactions (Sivasankar, S., W. Brieher, N. Lavrik, B. Gumbiner, and D. Leckband. 1999. Proc. Natl. Acad. Sci. USA. 96:11820–11824; Sivasankar, S., B. Gumbiner, and D. Leckband. 2001. Biophys J. 80:1758–68). We propose new models for how the cadherin extracellular repeats may contribute to adhesive specificity and function.

The most abundant isoform (HPLC-6) of type I antifreeze protein (AFP 1 ) in winter flounder is a 37-amino-acid-long, alanine-rich, R-helical peptide, containing four Thr spaced 11 amino acids apart. It is generally assumed that HPLC-6 binds ice through a hydrogen-bonding match between the Thr and neighboring Asx residues to oxygens atoms on the {202 h1} plane of the ice lattice. The result is a lowering of the nonequilibrium freezing point below the melting point (thermal hysteresis). HPLC-6, and two variants in which the central two Thr were replaced with either Ser or Val, were synthesized. The Ser variant was virtually inactive, while only a minor loss of activity was observed in the Val variant. CD, ultracentrifugation, and NMR studies indicated no significant structural changes or aggregation of the variants compared to HPLC-6. These results call into question the role of hydrogen bonds and suggest a much more significant role for entropic effects and van der Waals interactions in binding AFP to ice.Type I AFP 1 is the smallest and arguably the simplest of the four macromolecular antifreeze types characterized to date (1). It is in effect a single, long R-helix and therefore lacks tertiary structure (2). The most abundant isoform of this AFP (HPLC-6) from winter flounder (Pleuronectes americanus) is 37 amino acids long, contains three complete 11-amino-acid repeats of Thr-X 2 -Asx-X 7 , where X is generally alanine, and ends with the start of a fourth repeat. This helical periodicity that places the Thr and Asx residues on the same face of the helix, suggested a mechanism for adsorption of the AFP to ice in which these regularly spaced hydrophilic groups would hydrogen bond to oxygen atoms in the ice lattice (3). Adsorption leads to inhibition of ice crystal growth (4) because ice is forced to grow with a surface curvature between the bound AFP, which in turn results in a lowering of the nonequilibrium freezing point below the melting point (5, 6). The difference in these two temperatures is termed thermal hysteresis and is used as a measure of antifreeze activity.At very low concentrations, AFP bind to ice but do not stop its growth. Under these conditions bound AFP is frozen into the ice rather than excluded by the advancing ice front. The protein binding planes in these crystals have been made visable by sublimation (ice etching) and determined to be the {202 h1} pyramidal plane of hexagonal ice (I h ) for type I AFP (5). Moreover, because this antifreeze is a nonglobular, extended molecule it was possible to establish a direction 〈011 h2〉 of binding on the plane. An elegant proof of this resulted from the synthesis of an all D-type I AFP, which was shown by the ice etching method to bind to the same plane but in the mirror image direction (7). This information was used to suggest a hydrogen-bonding match between the i, i + 11 threonines spaced 16.5 Å apart along the helix and accessible ice lattice oxygens spaced 16.7 Å apart along the 〈011 h2〉 direction of the {202 h1} binding plane.On the ba...