No abstract

Increasing environmental awareness has promoted an interest in alternative strategies to common plastics obtained from fossil sources, stimulating research on the use of biodegradable and edible films/coatings obtained from renewable sources such as arrowroot starch. This research work aimed to evaluate the use of arrowroot starch on the formation of edible films and coatings. Increasing the concentration of arrowroot starch (from 1% to 5%, mass/mass) in the film produced by casting resulted in increased water vapor permeability (from 2.20 to 3.68 g mm/m2 day kPa), moisture content (3.22% to 7.95%), increased thickness (from 0.029 to 0.101 mm), and decreased solubility in water (from 22.45% to 13.89%). The films were homogeneous, transparent and manageable, with the exception of the film with 1% starch. Film-forming solutions at concentrations of 0%, 2%, and 4% (mass/mass) of arrowroot starch were prepared and applied to plums to evaluate post-harvest behavior when stored at 25 and 5 °C for 35 days. The 2% coating adhered well to the plums’ surfaces, was bright and was effective in reducing mass loss and respiratory rate, associated with storage temperature of 5 °C. The 4% coating presented an opaque and flocculated appearance.

Grape processing residues are a good source of bioactive and nutritional compounds. The incorporation of grape pomace extract (GPE) in starch films can be a strategy for the elaboration of new food packaging products for applications such as edible films or fruit strips. In this context, the objective of this research was to analyze the effect of incorporation and variation of concentration of GPE (0, 20, 30, and 40% mass/mass starch solids) on the physical chemical properties of arrowroot starch edible films created by casting. The GPE was characterized for moisture content, pH, total titratable acidity, total soluble solids, and anthocyanin content. Starch films with and without GPE were evaluated by analyzing their visual appearance, water activity, water content, thickness, water solubility, and water vapor permeability. The GPE had high water content, acidity, and anthocyanins content. The films with GPE showed a noticeable reddish color, similar to observed for the GPE. Increasing the concentration of GPE in the film resulted in significantly increased (p < 0.05) thickness (from 0.060 to 0.106 mm), water content (from 8.17 to 12.48%), solubility in water (from 13.33 to 33.32%), and water vapor permeability (from 3.72 to 6.65 g.mm/m2 day kPa). GPE increased the hydrophilic portion of the film, in addition to acting as a plasticizer, decreasing the molecular interactions of the polymer chain, and favoring its solubilization, which is desirable for applications such as edible films. The elaboration of arrowroot starch films with the incorporation of grape pomace is a good alternative for the reduction of by-products of grape processing.

No abstract

Jamun (Syzygium cumini L.) is a fruit rich in anthocyanins, an important group of natural pigments, with color ranging from red to blue, soluble in water, highly antioxidant. Despite its great potential for use as a natural dye, its application is a challenge, due to the instability of these compounds in the environmental conditions of processing and storage commonly used by the food industry. Therefore, this study evaluated the microencapsulation of anthocyanin-rich jamun pulp by ionic gelation (IG) and its protein-coating by electrostatic interaction (PC). The effect of the ratio of sodium alginate solids and jamun pulp (1:0.40 to 1:2, w/w) and the concentration of gelatin coating solution (0% to 10%, w/w) on the morphology, water and total protein content and anthocyanins content in the microparticles were evaluated. Visually, the IG particles showed color tones ranging from reddish to purplish, which became less intense and opaque after being submitted to the gelatin coating process. Microscopic images demonstrated that microparticles formed had an irregular and heterogeneous shape with disorganized gel network formation is due to the presence of solid structures of jamun pulp, observed within the microparticles. The greater the concentration of gelatin in the coating solution, the greater the protein adsorption for the formation of the protective layer, ranging from 21.82 ± 0.72% (T1) to 55.87 ± 4.23% (T6). Protein adsorption on the GI resulted in a decrease in moisture content (ranging from 87.04 ± 0.22 to 97.06 ± 0.12%) and anthocyanins contents (ranging from 5.84 ± 0.62 to 0.78 ± 0.14%) in the PC microparticles.