Well-established techniques, e.g., chromatography and capillary electrophoresis, are available for separating nanosized particles, such as proteins. However, similar techniques for separating micron-sized particles are still needed. Insulator-based electrokinetic (iEK) systems can achieve efficient microparticle separations by combining linear and nonlinear EK phenomena. Of particular interest are charge-based separations, which could be employed for separating similar microorganisms, such as bacterial cells of the same size, same genus, or same strain. Several groups have reported charge-based separations of microparticles where a zeta potential difference of at least 40 mV between the microparticles was required. The present work pushes the limit of the discriminatory capabilities of iEK systems by reporting the charged-based separation of two microparticles of the same size (5.1 μm), same shape, same substrate material, and with a small difference in particle zeta potentials of only 3.6 mV, which is less than 10% of the difference in previous studies. By building an accurate COMSOL Multiphysics model, which correctly accounts for dielectrophoresis and electrophoresis of the second kind, it was possible to identify the conditions to achieve this challenging separation. Furthermore, the COMSOL model allowed predicting particle retention times (t R,p) which were compared with experimental values (t R,e). The separations results had excellent reproducibility in terms of t R,e with variations of only 9% and 11% between repetitions. These findings demonstrate that, by following a robust protocol that involves modeling and experimental work, it is possible to discriminate between highly similar particles, with much smaller differences in electrical charge than previously reported.

This study focuses on the dependence of nonlinear electrophoretic migration of particles on the particle size and particle electrical charge. This is the first report of the experimental assessment of the mobilities of the nonlinear electrophoretic velocity of colloidal polystyrene microparticles under two distinct electric field dependences. A total of nine distinct types of polystyrene microparticles of varying size and varying electrical charge were divided into two groups to study separately the effects of particle size and the effects of particle charge. The mobilities of the nonlinear electrophoretic velocity of each particle type were determined in both the cubic and 3/2 regimes (μ EP,NL(3) and μ EP,NL (3/2) ). The results unveiled that both mobilities had similar relationships with particle size and charge. The magnitude of both μ EP,NL(3) and μ EP,NL (3/2) increased with increasing particle size and decreased with increasing magnitude of particle charge. However, the observed trends were not perfect as discussed in the Results and Discussion section but still provide valuable information. These findings will aid in the design of future size-based and charge-based separations of particles and microorganisms.

INTRODUCTION Ras  Labs’ Synthetic  Muscle™  will  allow  amputees  to  continue  their  active  lives  without  needing  to adjust the fitting of their prosthetic device(s) throughout the day.  This technology promises to resolve major  issues  facing  amputees,  most  notably  the  pain  of  prosthetic  slippage  and  tissue  breakdown. Synthetic  Muscle™,  comprising  electroactive  polymers  (EAPs),  actively  expand  or  contract  at  low voltages, while offering impact resistance and pressure sensing, all in one integrated solution.   The main  objectives  of  this  project  is  to  determine  the  feasibility  of  the  EAP  pads  incorporated  into prosthetic  liners  or  sockets  and  to  create  prototypes  of  these  EAP  based  shape-morphing  pad systems.  In collaboration with UPI, testing of these EAP based pads located in strategic areas of the socket  was  initiated  with  customers  (BK  and  AK)  for  evaluation  and  feedback.   Characterization  of Synthetic  Muscle™  as  dual  use  pressure  sensors  was  initiated.   This  is  a  continuation  Ras  Labs’ dynamic prosthetic pad project, which demonstrated how the volume of the EAP can be changed from applying a low voltage and operating temperatures for use in adjustable prosthetic liners and sockets 1-8. Abstract PDF  Link: https://jps.library.utoronto.ca/index.php/cpoj/article/view/32048/24462 How to cite: Rasmussen L, Rodriguez S, Bowers M, Smith D, Martino G, Rizzo L, Scheiber C, d’Almeida J,  Dillis C. Adjustable Liners and Sockets for Prosthetic Devices. CANADIAN PROSTHETICS & ORTHOTICS JOURNAL, VOLUME 1, ISSUE 2, 2018; ABSTRACT, POSTER PRESENTATION AT THE AOPA’S 101ST NATIONAL ASSEMBLY, SEPT. 26-29, VANCOUVER, CANADA, 2018. DOI: https://doi.org/10.33137/cpoj.v1i2.32048 Abstracts were Peer-reviewed by the American Orthotic Prosthetic Association (AOPA) 101st National Assembly Scientific Committee.  http://www.aopanet.org/