No abstract

No abstract

The paper presents the results of an ambient vibration monitoring campaign conducted on so-called "Clock Tower" (Torre delle Ore), one the best known and most visited monuments in the historic centre of Lucca. The vibrations of the tower were continuously monitored from November 2017 to March 2018 using high-sensitivity instrumentation. In particular, four seismic stations provided by the Istituto Nazionale di Geofisica e Vulcanologia and two three-axial accelerometers developed by AGI S.r.l., spin-off of the Istituto Nazionale di Astrofisica, were installed on the tower. The measured vibration level was generally very low, since the structure lies in the middle of a limited traffic area. Nevertheless, the availability of two different types of highly sensitive and accurate instruments allowed the authors to follow the dynamic behaviour of the tower during the entire monitoring period and has moreover provided cross-validation of the results.

No abstract

No abstract

No abstract

This paper presents a new numerical tool for evaluating the vibration frequencies and mode shapes of masonry buildings in the presence of cracks. The algorithm has been implemented within the NOSA-ITACA code, which models masonry as a nonlinear elastic material with zero tensile strength. Some case studies are reported, and the differences between linear and nonlinear behaviour highlighted.

A novel method for performing model updating on finite element models is presented. The approach is particularly tailored to modal analyses of buildings, by which the lowest frequencies, obtained by using sensors and system identification approaches, need to be matched to the numerical ones predicted by the model. This is done by optimizing some unknown material parameters (such as mass density and Young's modulus) of the materials and/or the boundary conditions, which are often known only approximately. In particular, this is the case when considering historical buildings.The straightforward application of a general-purpose optimizer can be impractical, given the large size of the model involved. In the paper, we show that, by slightly modifying the projection scheme used to compute the eigenvalues at the lowest end of the spectrum one can obtain local parametric reduced order models that, embedded in a trust-region scheme, form the basis for a reliable and efficient specialized algorithm.We describe an optimization strategy based on this approach, and we provide numerical experiments that confirm its effectiveness and accuracy.