No abstract

No abstract

No abstract

Enzymatic hydrolysis is recognised as an effective pre-treatment for increasing biodegradability of sludge. In this work, isolated commercial enzymes as well as in-situ enzymes producer bacteria were used respectively as enhancers and pre-treatments of sewage sludge. Biodegradability of sample as well as biomethane potential production were studied. Results showed that depuration efficiencies in terms of CODs (73.5-85.5 %) and TVS (28.5-42.7 %) were more than twice the control value. In addition, pretreated samples as well as enhanced samples with enzymes generated more biomethane than control. The optimal ones, were those with the isolated proteases (P) and with bacteria (Bacillus licheniformis) treatment in-situ (F), producing a total volume of 72.4 ± 2.62 ml CH4 and 114 ml ± 0.46 CH4, respectively, increasing the biogas volume in 3.65 and 5.77 times respectively compared with control.

The high production of raw olive oil mill wastewater (OMW) is a current environmental problem due to its high organic load and phenol compounds. In this work, photo-Fenton reaction as an advanced oxidation process has been chosen for OMW treatment. In this sense, different iron salts (FeCl3, Fe2(SO4)3, FeSO4·7H2O, and Fe(ClO4)3) as catalysts were used in order to compare their effects on treatment. For each catalyst, different H2O2 concentrations (2.5, 5.0, 7.5, 10.0, 15.0, 20.0, and 30.0%, w/v) as oxidizing agents were tested. The common experimental conditions were temperature 20 °C, the catalyst/H2O2 ratio = 0.03, pH = 3, and ultraviolet light. The Lagergren kinetic model, in cases of total organic carbon removal, for the best H2O2 concentration per catalyst was used. During the experiments, the water quality was determined by measuring the removal percentages on chemical oxygen demand, total carbon, total organic carbon, total nitrogen, total phenolic compounds, total iron, turbidity and electric conductivity. The best catalyst was FeCl3 and the optimum H2O2 concentration was 7.5% (w/v). At these optimal conditions, the removal percentages for chemical oxygen demand, total phenolic compounds, total carbon, total organic carbon and total nitrogen were 60.3%, 88.4%, 70.1%, 63.2% and 51.5%, respectively.