This study evaluated the marginal adaptation and fracture resistance of CAD/CAM-fabricated zirconia crowns luted using different luting agents. Twenty crown restorations were produced using IPS ZirCAD zirconium oxide blocks (IZC), and another 20 using Lava zirconium oxide blocks (L). Ten teeth were used as control. Luting agents used were an etch-and-rinse adhesive (Variolink II) and a self-etch adhesive (Multilink Automix). Internal and marginal adaptation was evaluated using silicone replica technique. Fracture resistance was evaluated using a compression test. Marginal discrepancy was 89.26 μm for L crowns and 88.84 μm for IZC crowns, and difference was statistically insignificant. However, L crowns showed significantly larger axial and occlusal gaps than IZC crowns (p<0.05). Fracture resistance of IZC-Multilink was higher than the other groups, although the difference was not significant. Results showed that CAD/CAM-fabricated crowns showed acceptable in vitro marginal discrepancies and fracture strengths.

All groups showed clinically acceptable fracture strength results. According to the study, both the onlay fabrication system and adhesive cements can be a viable treatment option.

Indications, designs, abutment teeth preparation, provisionalization, try-in, surface treatment options, and cementation of the all-ceramic resin-bonded fixed dental prostheses are described in this article. Clinical survival rates are also given in detail, so that clinicians can easily compare the current studies and give their own decision about all-ceramic resin-bonded fixed dental prostheses in the anterior region.

No abstract

Zygomatic implants have been used for dental rehabilitation in patients with insufficient bone in the posterior upper jaw, due to, for example, tumor resection, trauma, or atrophy. Zygomatic implants are an alternative to complex free or vascularized bone grafting and distraction osteogenesis. A 42-year-old male patient with a severe defect in the right posterior maxilla, starting from the first canine region, which had occurred after tumor resection 3 years earlier, was referred to our department. One zygomatic implant (Brenemark System, Nobel Biocare, Goteborg, Sweden) to the zygoma and one dental implant to the canine region were placed. After a 5-month osseointegration period, a fixed denture was fabricated and adapted to the implants. Although the surgical and prosthetic procedures for zygoma implants are not easy, the final outcomes can be successful with appropriate planning.