Ceramic tile production is an industrial process where energy efficiency management is crucial, given the high amount of energy (electrical and thermal) required by the production cycle. This study presents the preliminary results of a research project aimed at defining the benefits of using combined heat and power (CHP) systems in the ceramic sector. Data collected from ten CHP installations allowed us to outline the average characteristics of prime movers, and to quantify the contribution of CHP thermal energy supporting the dryer process. The electric size of the installed CHP units resulted in being between 3.4 MW and 4.9 MW, with an average value of 4 MW. Data revealed that when the goal is to maximize the generation of electricity for self-consumption, internal combustion engines are the preferred choice due to higher conversion efficiency. In contrast, gas turbines allowed us to minimize the consumption of natural gas input to the spray dryer. Indeed, the fraction of the dryer thermal demand (between 600–950 kcal/kgH2O), covered by CHP discharged heat, is strictly dependent on the type of prime mover installed: lower values, in the range of 30–45%, are characteristic of combustion engines, whereas the use of gas turbines can contribute up to 77% of the process’s total consumption.
In the present study, the results of the numerical implementation of a mathematical model of a planar anode-supported SOFC are reported. In particular, model results are validated and discussed when the fuel is a mixture of hydrogen and carbon monoxide, focusing on the importance of simulating direct oxidation of carbon monoxide. The mathematical model is solved in a 3D environment and the key issue is the validation comparing with experimental data, which is made in different operating conditions to establish the reliability of the presented model. The results show the importance of simulating direct oxidation of carbon monoxide and its effect on the fuel cell performance.
In this work, a novel methodology to assess energy performance indicators of productive and economic sectors trough the analysis of the Italian mandatory energy audits database is presented. The updating of sectoral reference energy performance indicators is fundamental for both companies and policy makers—for the formers to evaluate and compare their energy performance with competitors in order to achieve improvements and for the latter to effectively monitor the impact of energy policies. This methodology could be potentially applied to all production sectors, providing key information needed to characterize various production processes from an energy point of view. Awareness of energy efficiency and sectorial benchmarking represent the first necessary steps for companies moving towards energy transition. This paper provides details of the statistical method developed and its application to the NACE 23 division “Manufacturing of other non-metallic mineral products”, with a focus on the cement industry. For this sector, results are presented in terms of specific indicators based on energy source. General results, methodological insights, and validation of the proposed case study are discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.