Chip-based microfluidics enable the seamless integration of different functions into single devices. Here, we present microfluidic chips containing porous polymer monolithic columns as a means to facilitate chemical transformations as well as both downstream chromatographic separation and mass spectrometric analysis. Rapid liquid phase lithography prototyping creates the multifunctional device economically.

In this study, we present the coupling of chip-based electrochromatography to MS using a glass chip with a monolithically integrated nanoelectrospray emitter. As separation column, an acrylate-based porous polymer monolith is implemented into the glass chip by photopolymerization. For the establishment and development of this method, we used a test mixture detectable with both fluorescence and ESI-MS. After successful evaluation of the approach with the test solutes, it was applied exemplarily for drug analysis such as high-speed separations of benzodiazepines in pharmaceuticals.

A fast and straightforward method to prototype microfluidic chip systems for dead-volume-free hyphenation to electrospray-ionisation mass spectrometry is presented. The developed approach based on liquid-phase lithography provides an inexpensive and reliable access to microfluidic chips for MS coupling which can be manufactured in any laboratory with low technical demands. The rapid prototyping approach enables the seamless integration of capillaries serving as electrospray emitters with negligible dead volume. The high versatility of the presented prototyping method and the applicability of a variety of chip-based devices in different fields of lab-on-a-chip technology are established for analytical separations by means of chip-electrochromatography-MS and for continuous-flow synthesis using microreactor technology with MS detection.

In this article, we present a novel approach for the sheathless coupling of microchip electrophoresis (MCE) with electrospray mass spectrometry (ESI-MS). The key element is an ion-conductive hydrogel membrane, placed between the separation channel and an adjacent microfluidic supporting channel, contacted via platinum electrodes. This solves the persistent challenge in hyphenation of mass spectrometry to chip electrophoresis, to ensure a reliable electrical connection at the end of the electrophoresis channel without sacrificing separation performance and sensitivity. Stable electric contacting is achieved via a Y-shaped supporting channel structure, separated from the main channel by a photo polymerised, ion permeable hydrogel membrane. Thus, the potential gradient required for performing electrophoretic separations can be generated while simultaneously preventing gas formation due to electrolysis. In contrast to conventional make-up or sheathflow approaches, sample dilution is also avoided. Rapid prototyping allowed the study of different chip-based approaches, i.e. sheathless, open sheathflow and electrode support channel designs, for coupling MCE to ESI-MS. The performance was evaluated with fluorescence microscopy and mass spectrometric detection. The obtained results revealed that the detection sensitivity obtained in such Y-channel chips with integrated hydrogel membranes was superior because sample dilution or loss was prevented. Furthermore, band broadening is reduced compared to similar open structures without a membrane.