The material properties of 3D printed continuous fiber composites have been studied many times in the last years. However, only a minimal number of samples were used to determine the properties in each of the reported studies. Moreover, reported results can hardly be compared due to different sample geometries. Consequently, the variability of the mechanical properties (from one sample to the other) is a crucial parameter that has not been well quantified yet. In the present work, the flexural properties of 3D printed continuous carbon fiber/nylon composite specimens were experimentally quantified, using batches of 15 test specimens. In order to account for the possible influence of the quality of the prepreg filaments on the observed variability, three different filament rolls were used to manufacture the different batches. Also, two configurations were tested, with a fiber direction parallel (longitudinal) or perpendicular (transverse) to the main axis of the specimens. The results show moderate to high variabilities of the flexural modulus, flexural strength and maximum strain. The coefficient of variation was more than twice as high in the transverse case as in the longitudinal case.
Die Fortbildungs-und Workshopreihe GEKONAWI bestehenden Fortbildungs-und Workshopreihe entwickelt, erprobt und evaluiert. Die vier Module befähigen zur Entwicklung von Geschäft smodellen für nachhaltiges Wirtschaft en (Modul 1) und deren Umsetzung durch Planung von Geschäft s-und Arbeitsprozessen für nachhaltiges Wirtschaft en (Modul 2) sowie zur Planung von Lehr-Lernprozessen (Modul 3) und systematischen Entwicklung und Bilanzierung von Kompetenzen für nachhaltiges Wirtschaft en (Modul 4). In Abbildung 1 sind diese Module zunächst in allgemeiner Form dargestellt. Schwerpunktmäßig wurden vier jeweils eintägige Module (je 10 Unterrichtsstunden à 45 Minuten) für Unternehmen des Einzel-, Groß-und Außenhandels entwickelt. Die Module lassen sich jedoch grundsätzlich auch auf andere Branchen und Wirtschaft ssektoren übertragen. Idealtypisch werden-unabhängig vom konkreten Umsetzungssetting-alle vier Module mit einem zeitlichen Abstand von ca. vier bis sechs Wochen angeboten, da für jedes Modul Selbstlernphasen zur Vor-und Nachbereitung sowie insbesondere zum Transfer der Inhalte in die betriebliche Praxis vorgesehen sind. Die vier Module lassen sich auch einzeln und bedarfsspezifi sch anbieten. Aufgrund der modularen und fl exiblen Umsetzbarkeit der Module ergeben sich weitere Adressat(inn)en dieses Handbuchs: So können auch Organisationsentwickler/-innen, Personalentwickler/-innen oder Referent(inn)en Elemente des GEKONAWI-Konzeptes umsetzen.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.