The demand for minute-scale forecasts of wind power is continuously increasing with the growing penetration of renewable energy into the power grid, as grid operators need to ensure grid stability in the presence of variable power generation. For this reason, IEA Wind Tasks 32 and 36 together organized a workshop on “Very Short-Term Forecasting of Wind Power” in 2018 to discuss different approaches for the implementation of minute-scale forecasts into the power industry. IEA Wind is an international platform for the research community and industry. Task 32 tries to identify and mitigate barriers to the use of lidars in wind energy applications, while IEA Wind Task 36 focuses on improving the value of wind energy forecasts to the wind energy industry. The workshop identified three applications that need minute-scale forecasts: (1) wind turbine and wind farm control, (2) power grid balancing, (3) energy trading and ancillary services. The forecasting horizons for these applications range from around 1 s for turbine control to 60 min for energy market and grid control applications. The methods that can be applied to generate minute-scale forecasts rely on upstream data from remote sensing devices such as scanning lidars or radars, or are based on point measurements from met masts, turbines or profiling remote sensing devices. Upstream data needs to be propagated with advection models and point measurements can either be used in statistical time series models or assimilated into physical models. All methods have advantages but also shortcomings. The workshop’s main conclusions were that there is a need for further investigations into the minute-scale forecasting methods for different use cases, and a cross-disciplinary exchange of different method experts should be established. Additionally, more efforts should be directed towards enhancing quality and reliability of the input measurement data.

This paper describes two methods for creating improved probabilistic wind power forecasts through the use of turbine-level data. The first is a feature engineering approach whereby deterministic power forecasts from the turbine level are used as explanatory variables in a wind farm level forecasting model. The second is a novel bottom-up hierarchical approach where the wind farm forecast is inferred from the joint predictive distribution of the power output from individual turbines. Notably, the latter produces probabilistic forecasts that are coherent across both turbine and farm levels, which the former does not. The methods are tested at two utility scale wind farms and are shown to provide consistent improvements of up to 5%, in terms of continuous ranked probability score compared to the best performing state-of-the-art benchmark model. The bottom-up hierarchical approach provides greater improvement at the site characterized by a complex layout and terrain, while both approaches perform similarly at the second location. We show that there is a clear benefit in leveraging readily available turbine-level information for wind power forecasting.

Accurate short‐term power forecasts are crucial for the reliable and efficient integration of wind energy in power systems and electricity markets. Typically, forecasts for hours to days ahead are based on the output of numerical weather prediction models, and with the advance of computing power, the spatial and temporal resolutions of these models have increased substantially. However, high‐resolution forecasts often exhibit spatial and/or temporal displacement errors, and when regarding typical average performance metrics, they often perform worse than smoother forecasts from lower‐resolution models. Recent computational advances have enabled the use of large‐eddy simulations (LESs) in the context of operational weather forecasting, yielding turbulence‐resolving weather forecasts with a spatial resolution of 100 m or finer and a temporal resolution of 30 seconds or less. This paper is a proof‐of‐concept study on the prospect of leveraging these ultra high‐resolution weather models for operational forecasting at Horns Rev I in Denmark. It is shown that temporal smoothing of the forecasts clearly improves their skill, even for the benchmark resolution forecast, although potentially valuable high‐frequency information is lost. Therefore, a statistical post‐processing approach is explored on the basis of smoothing and feature engineering from the high‐frequency signal. The results indicate that for wind farm forecasting, using information content from both the standard and LES resolution models improves the forecast accuracy, especially with a feature selection stage, compared with using the information content solely from either source.

No abstract

This paper describes a method to generate improved probabilistic wind farm power forecasts in a hierarchical framework with the incorporation of production data from individual wind turbines. Wind power forms a natural hierarchy as generated electricity is aggregated from the individual turbine, to farm, to the regional level and so on. To forecast the wind farm power generation, a layered approach is proposed whereby deterministic forecasts from the lower layer (turbine level) are used as input features to an upper-level (wind farm) probabilistic model. In a case study at a utility scale wind farm it is shown that improvements in probabilistic forecast skill (CRPS) of 1.24% and 2.39% are obtainable when compared to two very competitive benchmarks based on direct forecasting of the wind farm power using Gradient Boosting Trees and an Analog Ensemble, respectively.