Fullerene single-wall nanotubes (SWNTs) were produced in yields of more than 70 percent by condensation of a laser-vaporized carbon-nickel-cobalt mixture at 1200degreesC. X-ray diffraction and electron microscopy showed that these SWNTs are nearly uniform in diameter and that they self-organize into "ropes," which consist of 100 to 500 SWNTs in a two-dimensional triangular lattice with a lattice constant of 17 angstroms. The x-ray form factor is consistent with that of uniformly charged cylinders 13.8 +/- 0.2 angstroms in diameter. The ropes were metallic, with a single-rope resistivity of <10(-4) ohm-centimeters at 300 kelvin. The uniformity of SWNT diameter is attributed to the efficient annealing of an initial fullerene tubelet kept open by a few metal atoms; the optimum diameter is determined by competition between the strain energy of curvature of the graphene sheet and the dangling-bond energy of the open edge, where growth occurs. These factors strongly favor the metallic (10,10) tube with C5v symmetry and an open edge stabilized by triple bonds.

No abstract

The control and dispersal of graphene nanosheets in polymer hosts are challenges in the development of high-performance graphene-based nanocomposites due to the strong interlayer cohesive energy and surface inertia. Here we report a simple and practical approach to synthesize graphene-reinforced poly(vinyl alcohol) (PVA) composite films by incorporating graphene oxide and graphene into PVA aqueous solution. The resulting nanocomposites revealed increases of up to 212% in tensile strength and 34% in elongation at break with only 0.5 wt% graphene content. Water absorption measurements showed that the water absorption ratio of the graphene/PVA composites decreased from 105.2 to 48.8%, and the barrier properties were obviously improved. Contact angle measurements showed that the composites were hydrophobic (θ > 90 • ) in contrast to the highly hydrophilic (θ < 90 • ) pure PVA.

Two-dimensional (2D) crystals of organic semiconductors (2DCOS) have attracted attention for large-area and low-cost flexible optoelectronics. However, growing large 2DCOS in controllable ways and transferring them onto technologically important substrates, remain key challenges. Herein we report a facile, general, and effective method to grow 2DCOS up to centimeter size which can be transferred to any substrate efficiently. The method named "solution epitaxy" involves two steps. The first is to self-assemble micrometer-sized 2DCOS on water surface. The second is epitaxial growth of them into millimeter or centimeter sized 2DCOS with thickness of several molecular layers. The general applicability of this method for the growth of 2DCOS is demonstrated by nine organic semiconductors with different molecular structures. Organic field-effect transistors (OFETs) based on the 2DCOS demonstrated high performance, confirming the high quality of the 2DCOS.