We demonstrate the ppt-level single-step selective monitoring of the presence of mercury ions (Hg2+) dissolved in environmental water by plasmon-enhanced vibrational spectroscopy. We combined a nanogap-optimized mid-infrared plasmonic structure with mercury-binding DNA aptamers to monitor in-situ the spectral evolution of the vibrational signal of the DNA induced by the mercury binding. Here, we adopted single-stranded thiolated 15-base DNA oligonucleotides that are immobilized on the Au surface and show strong specificity to Hg2+. The mercury-associated distinct signal is located apart from the biomolecule-associated broad signals and is selectively characterized. For example, with natural water from Lake Kasumigaura (Ibaraki Prefecture, Japan), direct detection of Hg2+ with a concentration as low as 37 ppt (37 × 10−10%) was readily demonstrated, indicating the high potential of this simple method for environmental and chemical sensing of metallic species in aqueous solution.
Plasmon-induced hot-electron generation has recently received considerable interest and has been studied to develop novel applications in optoelectronics, photovoltaics and green chemistry. Such hot electrons are typically generated from either localized plasmons in metal nanoparticles or propagating plasmons in patterned metal nanostructures. Here we simultaneously generate these heterogeneous plasmon-induced hot electrons and exploit their cooperative interplay in a single metal-semiconductor device to demonstrate, as an example, wavelength-controlled polarity-switchable photoconductivity. Specifically, the dual-plasmon device produces a net photocurrent whose polarity is determined by the balance in population and directionality between the hot electrons from localized and propagating plasmons. The current responsivity and polarity-switching wavelength of the device can be varied over the entire visible spectrum by tailoring the hot-electron interplay in various ways. This phenomenon may provide flexibility to manipulate the electrical output from light-matter interaction and offer opportunities for biosensors, long-distance communications, and photoconversion applications.
Plasmons in metallic nanomaterials exhibit very strong size and shape effects, and thus have recently gained considerable attention in nanotechnology, information technology, and life science. In this review, we overview the fundamental properties of plasmons in materials with various dimensionalities and discuss the optical functional properties of localized plasmon polaritons in nanometer-scale to atomic-scale objects. First, the pioneering works on plasmons by electron energy loss spectroscopy are briefly surveyed. Then, we discuss the effects of atomistic charge dynamics on the dispersion relation of propagating plasmon modes, such as those for planar crystal surface, atomic sheets and straight atomic wires. Finally, standing-wave plasmons, or antenna resonances of plasmon polariton, of some widely used nanometer-scale structures and atomic-scale wires (the smallest possible plasmonic building blocks) are exemplified along with their applications.
A sol-gel-based ultrathin TiO2 lamination coating was adapted to a hydrothermally grown ZnO nanowire array to realize an all-oxide ultra-sensitive p-n photodiode. The core-shell heterojunction—the key component of the device—is composed of a 5–10 nm thick p-type Cr-doped TiO2 nanoshell and n-type single-crystalline ZnO nanowires (50 nm radius). Owing to the enhanced light scattering and carrier separation in the core-shell architecture, this device exhibits the highest performance among the ZnO nanowire-based photodetectors. At a moderate reverse bias of −5 V and under ultraviolet light illumination at 104 μW, it shows a switch current ratio of 140 and a responsivity as large as 250 A/W, while it shows nearly no response to the infrared and visible light.
From visible to mid-infrared frequencies, molecular sensing has been a major successful application of plasmonics because of the enormous enhancement of the surface electromagnetic nearfield associated with the induced collective motion of surface free carriers excited by the probe light. However, in the lower-energy terahertz (THz) region, sensing by detecting molecular vibrations is still challenging because of low sensitivity, complicated spectral features, and relatively little accumulated knowledge of molecules. Here, we report the use of a micron-scale thin-slab metamaterial (MM) architecture, which functions as an amplifier for enhancing the absorption signal of the THz vibration of an ultrathin adsorbed layer of large organic molecules. We examined bovine serum albumin (BSA) as a prototype large protein molecule and Rhodamine 6G (Rh6G) and 3,3′-diethylthiatricarbocyanine iodide (DTTCI) as examples of small molecules. Among them, our MM significantly magnified only the signal strength of bulky BSA. On the other hand, DTTCI and Rh6G are inactive, as they lack low-frequency vibrational modes in this frequency region. The results obtained here clearly demonstrate the promise of MM-enhanced absorption spectroscopy in the THz region for detection and structural monitoring of large biomolecules such as proteins or pathogenic enzymes.
We report on measurements and simulations of the efficient sunlight-driven and visible-active photocatalysts composed of plasmonic metal nanoparticles and ZnO nanowire (NW) arrays fabricated via an all-wet-chemical route. Because of the coupling between the ZnO dielectric response and the excitation of the Ag or Au nanoparticles, efficient electronic excitation can be induced in the vicinity of the metal-ZnO interfaces because optically-excited plasmonic particles can not only concentrate the electromagnetic field at the ZnO/particle interface, but also act as efficient sources of plasmonic hot electrons to be injected into the conduction band of the ZnO catalyst. The catalytic activities of the fabricated ZnO NWs are examined by photodegradation of methylene blue and by photocurrent measurements in a photovoltaic configuration. Numerical electromagnetic simulations were used to understand the behavior of the light on the nanometer-scale to clarify the catalytic enhancement mechanisms in both the ultraviolet (UV) and visible (VIS) regions. In addition, simulation results indicated that a near-surface normal but slightly tilted ZnO NW array geometry would provide an increased optical path length and enhanced multiple scattering and absorption processes arising from the localized surface plasmon resonances of the nanoparticles. The results obtained here clarify the role of the plasmon resonance and provide us with useful knowledge for the development of metal-oxide nano-hybrid materials for solar energy conversion.
Single-crystalline lead nanowires with length of about one micrometer and with effective diameters of a few tens of nanometers have been grown on vicinal silicon by a self-assembly process. They show strong plasmonic resonances in the infrared with a remarkable enhancement of the extinction upon the cooling below room temperature. The increase of the plasmonic extinction at resonance is linear with decreasing temperature but saturates before the Debye temperature is approached. This observation is in full accordance with the quasi-static description of plasmonic extinction with the intrinsic damping dominated by phonons and thus linearly temperature dependent well above the Debye temperature. The different slopes of this linear function for different wire thickness indicate the importance of surface and near surface phonon properties that can be described by a Debye temperature that is lower than the bulk value. The careful spectral analysis also yields temperature independent contributions to the electronic scattering rates for various wire thicknesses and, furthermore, a resonance frequency decreasing with temperature, which corresponds to the predicted trend in renormalization theory for electron−phonon interaction in a metal like lead.
& tien thanh pham 1* in this work, two copper-based biometamaterials were engineered using leaves of water cabbage (Pistia stratiotes) and purple bauhinia (Phanera purpurea) as templates. the copper sputtering was implemented to produce a thin copper film on the surface of leaves. The scanning electron microscopy (SeM) images exhibited the root hair-like nanostructure of water cabbage leaf and single comb-like nanostructure of purple bauhinia leaf. in spite of copper coating, the leaf surfaces of water cabbage and purple bauhinia were black and exhibited excellent light absorption at visible and near infrarrred wavelengths. It was estimated that these two types of leaves could absorb roughly 90% of light. Finite-difference time-domain (FDTD) calculations predicted the low reflectance stemming from the leaf nanostructures and copper coating layer. Because of the low cost of copper as a coating metal and simple procedure, this can be a promising method for quick fabrication of a thin copper film on the leaf nanostructure for application in blackbody or as the light absorbers.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.