In the process of excavating seven parallel tunnels at the Jinping II Hydropower Station, several extremely intense rockbursts occurred, killing and injuring construction workers and damaging several sets of equipment. Based on the characteristics and mechanisms of these rockbursts, four typical events were selected and their temporal and spatial characteristics were here described in detail. The geological conditions revealed after the rockbursts were surveyed carefully. The responses of support elements were also analyzed. The details documented in each case provide not only an important reference for understanding the development mechanisms of rockbursts but also a basis for the selection and development of rockburst prevention measures in deep hard rock tunnels.

No abstract

No abstract

No abstract

No abstract

The headrace tunnels at the Jinping II Hydropower Station cross the Jinping Mountain with a maximum overburden depth of 2,525 m, where 80% of the strata along the tunnels consist of marble. A number of extremely intense rockbursts occurred during the excavation of the auxiliary tunnels and the drainage tunnel. In particular, a tunnel boring machine (TBM) was destroyed by an extremely intense rockburst in a 7.2-m-diameter drainage tunnel. Two of the four subsequent 12.4-m-diameter headrace tunnels will be excavated with larger size TBMs, where a high risk of extremely intense rockbursts exists. Herein, a top pilot tunnel preconditioning method is proposed to minimize this risk, in which a drilling and blasting method is first recommended for the top pilot tunnel excavation and support, and then the TBM excavation of the main tunnel is conducted. In order to evaluate the mechanical effectiveness of this method, numerical simulation analyses using the failure approaching index, energy release rate, and excess shear stress indices are carried out. Its construction feasibility is discussed as well. Moreover, a microseismic monitoring technique is used in the experimental tunnel section for the real-time monitoring of the microseismic activities of the rock mass in TBM excavation and for assessing the effect of the top pilot tunnel excavation in reducing the risk of rockbursts. This method is applied to two tunnel sections prone to extremely intense rockbursts and leads to a reduction in the risk of rockbursts in TBM excavation.

No abstract

No abstract