No abstract

At currently achievable Fourier transform ion cyclotron resonance broadband mass spectrometry resolving power (m/deltam50% > 350,000 for 200 < m/z < 1,000), it would be necessary to spread out a conventional mass spectrum over approximately 200 m in order to provide visual resolution of the most closely resolved peaks. Fortunately, there are natural gaps in a typical mass spectrum, spaced 1 Da apart, because virtually no commonly encountered elemental compositions yield masses at those values. Thus, it is possible to break a broadband mass spectrum into 1-Da segments, rotate each segment by 90 degrees, scale each segment according to its mass defect (i.e., difference between exact and nominal mass), and then compress the spacing between the segments to yield a compact display. For hydrocarbon systems, conversion from IUPAC mass to "Kendrick" mass (i.e., multiplying each mass by 14.00000/14.01565) further simplifies the display by rectilinearizing the peak patterns. The resulting display preserves not only the "coarse" spacings (e.g., approximately 1 Da between odd and even masses, corresponding to either even vs odd number of nitrogens or 12C(c) vs 12C(c-1)13C1 elemental compositions of the same molecule; approximately 2-Da separations, corresponding to a double bond or ring; approximately 14 Da separations, corresponding to one CH2 group) but also the "fine structure" (i.e., different mass defects for different elemental compositions) across each 1-Da segment. The method is illustrated for experimental electrospray ionization FTICR ultrahigh-resolution mass spectra of a petroleum crude oil. Several thousand elemental compositions may be resolved visually in a single one-page two-dimensional display, and various compound families-class (NnOoSs), type (Z in C(c)H2(c+z)NnOoSs), and alkylation series-may be identified visually as well.

No abstract

Extra heavy petroleum crude oil (50% of the mixture boils at >566 °C) has been analyzed directly, without prior fractionation, by a high-field (9.4 T) Fourier transform ion cyclotron resonance mass spectrometer coupled to an external micro-electrospray ion source. At an average mass resolving power, (m/Δm 50% ≈ 50 000), a single wideband (250−1250 Da) mass spectrum exhibited ∼5000 resolved peaks with an average mass of 617 Da (e.g., up to 7−10 resolved peaks at each nominal mass). Their elemental compositions were positively identified by accurate mass measurement with an average deviation of less than 1 mDa from each assigned elemental composition. The number of elemental compositions at each nominal mass, the number of sulfur/oxygen atoms in a molecule, and aromaticity each increase with increasing mass. On the basis of elemental composition alone, we resolve more than 3000 distinct chemical formulas (excluding 13C isotopic species). Of the 3000 unique elemental compositions, we identify 12 major heteroatomic “classes”; (e.g., molecules containing N, NS, NS2, NO, NOS, etc.); for the various “classes”, we identify more than 100 hydrocarbon “types” (e.g., molecules with the same number of rings plus double bonds); and for each “type”, we determine the carbon number distribution (20−80 carbons) to reveal the number of alkyl carbons appended to aromatic rings. The present results represent the most complete chemical characterization ever achieved for such a complex mixture, based on a single experimental data set.

We have coupled atmospheric pressure photoionization (APPI) to a home-built 9.4-T Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. Analysis of naphtho[2,3-a]pyrene and crude oil mass spectra reveals that protonated molecules, deprotonated molecules, and radical molecular ions are formed simultaneously in the ion source, thereby complicating the spectra (>12 000 peaks per mass spectrum and up to 63 peaks of the same nominal mass), and eliminating the "nitrogen rule" for nominal mass determination of number of nitrogens. Nevertheless, the ultrahigh mass resolving power and mass accuracy of FT-ICR MS enable definitive elemental composition assignments, even for doublets as closely spaced as 1.1 mDa (SH3(13)C vs (12)C4). APPI efficiently ionizes nonpolar compounds that are unobservable by electrospray and allows nonpolar sulfur speciation of petrochemical mixtures.

No abstract

Amide hydrogen/deuterium exchange is a powerful biophysical technique for probing changes in protein dynamics induced by ligand interaction. The inherent low throughput of the technology has limited its impact on drug screening and lead optimization. Automation increases the throughput of H/D exchange to make it compatible with drug discovery efforts. Here we describe the first fully automated H/D exchange system that provides highly reproducible H/D exchange kinetics from 130 ms to 24 h. Throughput is maximized by parallel sample processing, and the system can run H/D exchange assays in triplicate without user intervention. We demonstrate the utility of this system to differentiate structural perturbations in the ligand-binding domain (LBD) of the nuclear receptor PPARgamma induced upon binding a full agonist and a partial agonist. PPARgamma is the target of glitazones, drugs used for treatment of insulin resistance associated with type II diabetes. Recently it has been shown that partial agonists of PPARgamma have insulin sensitization properties while lacking several adverse effects associated with full agonist drugs. To further examine the mechanism of partial agonist activation of PPARgamma, we extended our studies to the analysis of ligand interactions with the heterodimeric complex of PPARgamma/RXRalpha LBDs. To facilitate analysis of H/D exchange of large protein complexes, we performed the experiment with a 14.5-T Fourier transform ion cyclotron resonance mass spectrometer capable of measuring mass with accuracy in the ppb range.

We describe complex organic mixture analysis by 21 tesla (T) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Ultrahigh mass-resolving power (m/Δm > 2 700 000 at m/z 400) and mass accuracy (80 ppb rms) enable resolution and confident identification of tens of thousands of unique elemental compositions. We demonstrate 2.2-fold higher mass-resolving power, 2.6-fold better mass measurement accuracy, and 1.3-fold more assigned molecular formulas compared to our custom-built, state-of-the-art 9.4 T FT-ICR mass spectrometer for petroleum and dissolved organic matter (DOM) analyses. Analysis of a heavy petroleum distillate exemplifies the need for ultrahigh-performance mass spectrometry (49 040 assigned molecular formulas for 21 T versus 29 012 for 9.4 T) and extends the identification of previously unresolved O, SO, and NO classes. Mass selective ion accumulation (20 Thompson isolation) of an asphalt volcano sample yields 462 resolved mass spectral peaks at m/z 677 and reveals previously unresolved CHNOS mass differences at high mass (m/z > 600). Similar performance gains are realized in the analysis of dissolved organic matter, where doubly charged O species are resolved from singly charged SO species, which requires a mass-resolving power greater than 1 400 000 (at m/z 600). This direct comparison reveals the continued need for higher mass-resolving power and better mass accuracy for comprehensive molecular characterization of the most complex organic mixtures.