We report on the synthesis, characterization, and electrochemical performance of novel, ultrathin Pt monolayer shell-Pd nanowire core catalysts. Initially, ultrathin Pd nanowires with diameters of 2.0 ± 0.5 nm were generated, and a method has been developed to achieve highly uniform distributions of these catalysts onto the Vulcan XC-72 carbon support. As-prepared wires are activated by the use of two distinctive treatment protocols followed by selective CO adsorption in order to selectively remove undesirable organic residues. Subsequently, the desired nanowire core-Pt monolayer shell motif was reliably achieved by Cu underpotential deposition followed by galvanic displacement of the Cu adatoms. The surface area and mass activity of the acid and ozone-treated nanowires were assessed, and the ozone-treated nanowires were found to maintain outstanding area and mass specific activities of 0.77 mA/cm(2) and 1.83 A/mg(Pt), respectively, which were significantly enhanced as compared with conventional commercial Pt nanoparticles, core-shell nanoparticles, and acid-treated nanowires. The ozone-treated nanowires also maintained excellent electrochemical durability under accelerated half-cell testing, and it was found that the area-specific activity increased by ~1.5 fold after a simulated catalyst lifetime.

In this perspective, the catalytic shortfalls of contemporary DMFCs are discussed in the context of the materials that are currently being employed as electrocatalysts in both the anode and cathode. In light of these shortfalls, the inherent advantages of one-dimensional (1D) nanostructures are highlighted so as to demonstrate their potential as efficient, robust, and active replacements for contemporary nanoparticulate electrocatalysts. Finally, we review in detail the recent applications of 1D nanostructured electrocatalysts as both anodes and cathodes, and explore their potentially promising results towards improving DMFC efficiency and cost-effectiveness. In the case of cathode electrocatalysts, our group has recently prepared both 200 nm platinum nanotubes and ultrathin 2 nm platinum nanowires, which evinced two-fold and seven-fold enhancements in area specific ORR activity, respectively, as compared with contemporary commercial Pt nanoparticles. Similarly, the development of one-dimensional anodic electrocatalysts such as alloyed PtRu and PtCo nanowires, hierarchical Pt~Pd nanowires, and segmented PtRu systems have yielded promising enhancements towards methanol oxidation.

We report on the synthesis, characterization, and electrocatalytic performance of ultrathin Pt nanowires with a diameter of less than 2 nm. An acid-wash protocol was employed in order to yield highly exfoliated, crystalline nanowires with a diameter of 1.3 +/- 0.4 nm. The electrocatalytic activity of these nanowires toward the oxygen reduction reaction was studied in relation to the activity of both supported and unsupported Pt nanoparticles as well as with previously synthesized Pt nanotubes. Our ultrathin, acid-treated, unsupported nanowires displayed an electrochemical surface area activity of 1.45 mA/cm(2), which was nearly 4 times greater than that of analogous, unsupported platinum nanotubes and 7 times greater than that of commercial supported platinum nanoparticles.

The behavior of crystalline nanoparticles depends strongly on which facets are exposed. Some facets are more active than others, but it is difficult to selectively isolate particular facets. This study provides fundamental insights into photocatalytic and photoelectrochemical performance of three types of TiO(2) nanoparticles with predominantly exposed {101}, {010}, or {001} facets, where 86-99% of the surface area is the desired facet. Photodegradation of methyl orange reveals that {001}-TiO(2) has 1.79 and 3.22 times higher photocatalytic activity than {010} and {101}-TiO(2), respectively. This suggests that the photochemical performance is highly correlated with the surface energy and the number of under-coordinated surface atoms. In contrast, the photoelectrochemical performance of the faceted TiO(2) nanoparticles sensitized with the commercially available MK-2 dye was highest with {010}-TiO(2) which yielded an overall cell efficiency of 6.1%, compared to 3.2% for {101}-TiO(2) and 2.6% for {001}-TiO(2) prepared under analogous conditions. Measurement of desorption kinetics and accompanying computational modeling suggests a stronger covalent interaction of the dye with the {010} and {101} facets compared with the {001} facet. Time-resolved THz spectroscopy and transient absorption spectroscopy measure faster electron injection dynamics when MK-2 is bound to {010} compared to other facets, consistent with extensive computational simulations which indicate that the {010} facet provides the most efficient and direct pathway for interfacial electron transfer. Our experimental and computational results establish for the first time that photoelectrochemical performance is dependent upon the binding energy of the dye as well as the crystalline structure of the facet, as opposed to surface energy alone.

We have employed an ambient, template-based technique that is simple, efficient, and surfactantless to generate a series of bimetallic Pd(1-x)Au(x) and Pd(1-x)Pt(x) nanowires with control over composition and size. Our as-prepared nanowires maintain significantly enhanced activity toward oxygen reduction as compared with commercial Pt nanoparticles and other 1D nanostructures, as a result of their homogeneous alloyed structure. Specifically, Pd(9)Au and Pd(4)Pt nanowires possess oxygen reduction reaction (ORR) activities of 0.49 and 0.79 mA/cm(2), respectively, which are larger than the analogous value for commercial Pt nanoparticles (0.21 mA/cm(2)). In addition, core-shell Pt~Pd(9)Au nanowires have been prepared by electrodepositing a Pt monolayer shell and the corresponding specific, platinum mass, and platinum group metal mass activities were found to be 0.95 mA/cm(2), 2.08 A/mg(Pt), and 0.16 A/mg(PGM), respectively. The increased activity and catalytic performance is accompanied by improved durability toward ORR.

We have synthesized novel ultrathin ternary PtRuFe nanowires (NW) and probed both their methanol oxidation reaction (MOR) and formic acid oxidation reaction (FAOR) activities as a function of chemical composition.

In this report, we utilize the U-tube double diffusion device as a reliable, environmentally friendly method for the size-controlled synthesis of high-quality, single crystalline Pd nanowires. The nanowires grown in 200 and 15 nm polycarbonate template pores maintain diameters of 270 ± 45 nm and 45 ± 9 nm, respectively, and could be isolated either as individual nanowires or as ordered free-standing arrays. The growth mechanism of these nanowires has been extensively explored, and we have carried out characterization of the isolated nanowires, free-standing nanowire arrays, and cross sections of the filled template in order to determine that a unique two-step growth process predominates within the template pores. Moreover, as-prepared submicrometer and nanosized wires were studied by comparison with ultrathin 2 nm Pd nanowires in order to elucidate the size-dependent trend in oxygen reduction reaction (ORR) electrocatalysis. Subsequently, the desired platinum monolayer overcoating was reliably deposited onto the surface of the Pd nanowires by Cu underpotential deposition (UPD) followed by galvanic displacement of the Cu adatoms. The specific and platinum mass activity of the core-shell catalysts was found to increase from 0.40 mA/cm(2) and 1.01 A/mg to 0.74 mA/cm(2) and 1.74 A/mg as the diameter was decreased from the submicrometer size regime to the ultrathin nanometer range.

In this report, we examine the composition- and size-dependent performance in hierarchical Pd1–x Au x nanowires (NWs) encapsulated with a conformal Pt monolayer shell (Pt∼Pd1–x Au x ). The ultrathin Pd1–x Au x NWs are prepared by a solution-based method wherein the chemical composition can be readily and predictably controlled. Importantly, as-prepared Pd9Au NWs maintain significantly enhanced oxygen reduction reaction (ORR) activity (0.40 mA/cm2), as compared with elemental Pd NW/C (0.12 mA/cm2) and Pt nanoparticles (NP)/C (0.20 mA/cm2), respectively. After the deposition of a Pt monolayer, a volcano-type composition dependence is observed in the ORR activity of the Pt∼Pd1–x Au x NWs as the Au content is increased from 0 to 30% with the activity of the Pt∼Pd9Au NWs (0.98 mA/cm2, 2.54 A/mgPt), representing the optimum performance. We note that the platinum group metal activity of the ultrathin 2 nm NWs (0.64 A/mg) is significantly enhanced as compared with that of analogous 50 nm NWs (0.16 A/mg) and commercial Pt NP/C (0.1–0.2 A/mg), thereby highlighting a distinctive size-dependent enhancement in NW performance.