waste gasification processes based on thermal plasma (DC or AC plasma torches) at lab scale versus typical performances of waste autothermal gasification: LHV of the syngas, cold gas efficiency and net electrical efficiency. In the last part, a review has been done on the various torch technologies used for waste gasification by plasma at industrial scale, the major companies on this market and the perspectives of the industrial development of the waste gasification by thermal plasma. The main conclusions are that plasma technology is considered as a highly attractive route for the processing of waste-to-energy and can be easily adapted to the treatment of various wastes (municipal solid wastes, heavy oil, used car tires, medical wastes …). The high enthalpy, the residence time and high temperature in plasma can advantageously improve the conditions for gasification, which are inaccessible in other thermal processes and can allow reaching, due to low tar content in the syngas, better net electrical efficiency than autothermal processes.

International audienceA 3-phase AC plasma torch has been developed and aims at overcoming some limits of the classical DC torches in terms of efficiency, cost and reliability. However, the arc behavior in 3-phase plasma torch remains poorly explored. This paper is dedicated to the high speed video camera at 100,000 frames per second and electrical signal analyses of arcs behavior in a 3-phase AC arc plasma torch. First, a reference case at 150 A, in nitrogen as working gas, has been deeply analyzed. Afterwards, a parametric study based on current and inter-electrode gap has been carried out. Results show that only one arc can exist at a given time and arcs rotate by switching from a pair of electrodes to another one, following the maximal electrical gap potential. However, a particular "abnormal" arc behavior was sometimes observed. Indeed, the arc motion within the inter-electrode gap increases the heat exchange and stabilizes the 3-phase discharge whereas the system is unbalanced when the arc is in the periphery. The analysis highlights that the arc motion is strongly influenced by the electrode jet velocity and repulsive Lorentz forces. The parametric study shows that the current increases both jet velocity and arc discharge stability. Elsewhere, the increase of the inter-electrode gap can also stabilizes the electrical 3-phase arc discharge. Furthermore, the correlation between arc motion and current waveform is highlighted. This work is likely to open the way toward a better understanding of 3-phase discharges in the perspective of their further optimization

No abstract