Aluminum aminoterephthalate MOF particulate materials (NH(2)-MIL-101(Al) and NH(2)-MIL-53(Al)), studied here as components of self-detoxifying surfaces, retained their reactivity following their covalent attachment to protective surfaces utilizing a newly developed strategy in which the MOF particles were deposited on a reactive adhesive composed of polyisobutylene/toluene diisocyanate (PIB/TDI) blends. Following MOF attachment and curing, the MOF primary amino groups were functionalized with highly nucleophilic 4-methylaminopyridine (4-MAP) by disuccinimidyl suberate-activated conjugation. The resulting MOF-4-MAP modified PIB/TDI elastomeric films were mechanically flexible and capable of degrading diisopropyl fluorophosphate (DFP), a chemical threat simulant.

Montmorillonite K-10 functionalized with α-nucleophilic 2-pralidoxime (PAM) and its zwitterionic oximate form (PAMNa) is introduced as a versatile material for chemical protection against organophosphorous (OP) compounds such as pesticides and chemical warfare agents (CWA). Upon inclusion into the montmorillonite interlayer structure, the pyridinium group of PAMNa is strongly physisorbed onto acidic sites of the clay, leading to shrinking of the interplanar distance. Degradation of diethyl parathion by PAMNa-functionalized montmorillonite in aqueous-acetonitrile solutions occurred primarily via hydrolytic conversion of parathion into diethylthio phosphoric acid, with the initial stages of hydrolysis observed to be pseudo-first-order reactions. Hydrolysis catalyzed by the clay intercalated by PAMNa was 10- and 17-fold more rapid than corresponding spontaneous processes measured at 25 and 70 °C, respectively. Hydrolytic degradation of diisopropyl fluorophosphate (DFP), a CWA simulant, was studied on montmorillonite clay functionalized by PAMNa and equilibrated with water vapor at 100% relative humidity by ³¹P high-resolution magic angle spinning NMR and was observed to be rather facile compared with the untreated montmorillonite, which did not show any DFP hydrolysis within 24 h. The incorporation of the functionalized clay particles into elastomeric film of polyisobutylene was shown to be a means to impart DFP-degrading capability to the film, with clay particle content exceeding 18 wt %.

Capillary-channeled polymer (C-CP) fibers extruded from nylon-6 are used as the stationary phase for the ion-exchange/reversed-phase mixed-mode chromatographic separation of a three protein mixture. The nylon-6 C-CP fibers are packed collinearly in a 250 x 1.5-mm i.d. column with an interstitial fraction of approximately 0.6. The effects of four displacing salts at three different pHs are studied with regards to protein retention time, peak width, selectivity, and resolution for a synthetic mixture consisting of myoglobin, ribonuclease A, and lysozyme to determine the optimum mobile phase conditions. The net charge model is found to be inadequate in fully explaining the retention behavior, as the proteins are retained by anion and cation-exchange interactions, as well as hydrophobic interactions with the stationary phase. It is found that pH and displacing salt strength had a significant influence on the retention properties and resolution of the proteins.

Comprehensive inventory management is central to the efficient operation of any facility that uses and stores chemicals. There are numerous software packages available that perform this function satisfactorily. Most commercially available inventory management software is regulatory or procurement focused and usually comes with upfront or monthly fees. This report describes freely downloadable software developed at Sandia National Laboratories that delivers an effective inventory management system with an additional focus on chemical security.

Chemical risk management is a process to control safety and security risks associated with hazardous chemicals. Chemical risk management includes the management of both chemical safety and chemical security. It is generally accepted that there are five pillars that make up chemical security management. Each of the five pillars are key components to the implementation of a chemical security risk management system. In this work, we will review the "Material Control and Accountability" pillar and how an academic institution can implement this principle using a chemical inventory management system (CIMS). A robust CIMS will improve the quality and efficiency of research, reduce time and resources associated with laboratory management, and reduce both the safety and security risks associated with chemicals.