Alternative materials for plasmonic devices have garnered much recent interest. A promising candidate material is titanium nitride. Although there is a substantial body of work on the formation of this material, its use for plasmonic applications requires a more systematic and detailed optical analysis than has previously been carried out. This paper describes an initial optimization of sputtered TiN thin films for plasmonic performance from visible into near-IR wavelengths. The metallic behavior of TiN films exhibits a sensitive dependence on the substrate and deposition details. We explored reactive and non-reactive sputter deposition of TiN onto various substrates at both room temperature and 600°C. Metallic character was compared for films grown under different conditions via spectroscopic ellipsometry and correlated with compositional and structural measurements via x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), and scanning transmission electron microscopy (STEM).

Titanium nitride (TiN) is a novel refractory plasmonic material which can sustain high temperatures and exhibits large optical nonlinearities, potentially opening the door for high-power nonlinear plasmonic applications. We fabricate TiN nanoantenna arrays with plasmonic resonances tunable in the range of about 950-1050 nm by changing the antenna length. We present second-harmonic (SH) spectroscopy of TiN nanoantenna arrays, which is analyzed using a nonlinear oscillator model with a wavelength-dependent second-order response from the material itself. Furthermore, characterization of the robustness upon strong laser illumination confirms that the TiN antennas are able to endure laser irradiation with high peak intensity up to 15 GW/cm(2) without changing their optical properties and their physical appearance. They outperform gold antennas by one order of magnitude regarding laser power sustainability. Thus, TiN nanoantennas could serve as promising candidates for high-power/high-temperature applications such as coherent nonlinear converters and local heat sources on the nanoscale.

Robust plasmonic nanoantennas at mid-infrared wavelengths are essential components for a variety of nanophotonic applications ranging from thermography to energy conversion. Titanium nitride (TiN) is a promising candidate for such cases due to its high thermal stability and metallic character. Here, we employ direct laser writing as well as interference lithography to fabricate large-area nanoantenna arrays of TiN on sapphire and silicon substrates. Our lithographic tools allow for fast and homogeneous preparation of nanoantenna geometries on a polymer layer, which is then selectively transferred to TiN by subsequent argon ion beam etching followed by a chemical wet etching process. The antennas are protected by an additional Al 2 O 3 layer which allows for high-temperature annealing in argon flow without loss of the plasmonic properties. Tailoring of the TiN antenna geometry enables precise tuning of the plasmon resonances from the near to the mid-infrared spectral range. Due to the advantageous properties of TiN combined with our versatile large-area and low-cost fabrication process, such refractory nanoantennas will enable a multitude of high-temperature plasmonic applications such as thermophotovoltaics in the future.

The authors used depth-resolved cathodoluminescence spectroscopy and current-voltage measurements to probe the temperature-dependent formation of native point defects and reaction layers at metal-ZnO interfaces and their effect on transport properties. These results identify characteristic defect emissions corresponding to metal-Zn alloy versus oxide formation. Au alloys with Zn above its eutectic temperature, while Ta forms oxide blocking layers that reduce current by orders of magnitude at intermediate temperatures. Defects generated at higher temperatures and/or with higher initial defect densities for all interfaces produce Ohmic contacts. These reactions and defect formation with annealing reveal a thermodynamic control of blocking versus Ohmic contacts.

Titanium nitride (TiN) has been identified as a promising refractory material for high temperature plasmonic applications such as surface plasmon polaritons (SPPs) waveguides, lasers and light sources, and near field optics. Such SPPs are sensitive not only to the highly metallic nature of the TiN, but also to its low loss. We have formed highly metallic, low-loss TiN thin films on MgO substrates to create SPPs with resonances between 775-825 nm. Scanning near-field optical microscopy (SNOM) allowed imaging of the SPP fringes, the accurate determination of the effective wavelength of the SPP modes, and propagation lengths greater than 10 microns. Further, we show the engineering of the band structure of the plasmonic modes in TiN in the mid-IR regime and experimentally demonstrate, for the first time, the ability of TiN to support Spoof Surface Plasmon Polaritons in the mid-IR (6 microns wavelength).