Abstract Background: The design and internal layout of modern operating rooms (OR) are influencing the surgical team’s collaboration and communication, ergonomics, as well as intraoperative hygiene substantially. Yet, there is no objective method for the assessment and design of operating room setups for different surgical disciplines and intervention types available. The aim of this work is to establish an improved OR setup for common procedures in arthroplasty. Methods With the help of computer simulation, a method for the design and assessment of enhanced OR setups was developed. New OR setups were designed, analyzed in a computer simulation environment and evaluated in the actual intraoperative setting. Thereby, a 3D graphical simulation representation enabled the strong involvement of clinical stakeholders in all phases of the design and decision-making process of the new setup alternatives. Results The implementation of improved OR setups reduced the instrument handover time between the surgeon and the scrub nurse, the travel paths of the OR team as well as shortened the procedure duration. Additionally, the ergonomics of the OR staff were improved. Conclusion The developed simulation method was evaluated in the actual intraoperative setting and proved its benefit for the design and optimization of OR setups for different surgical intervention types. As a clinical result, enhanced setups for total knee arthroplasty and total hip arthroplasty surgeries were established in daily clinical routine and the OR efficiency was improved.

Background: The design and internal layout of modern operating rooms (OR) are influencing the surgical team's collaboration and communication, ergonomics, as well as intraoperative hygiene substantially. Yet, there is no objective method for the assessment and design of operating room setups for different surgical disciplines and intervention types available. The aim of this work is to establish an improved OR setup for common procedures in arthroplasty. Methods: With the help of computer simulation, a method for the design and assessment of enhanced OR setups was developed. New OR setups were designed, analyzed in a computer simulation environment and evaluated in the actual intraoperative setting. Thereby, a 3D graphical simulation representation enabled the strong involvement of clinical stakeholders in all phases of the design and decision-making process of the new setup alternatives. Results: The implementation of improved OR setups reduces the instrument handover time between the surgeon and the scrub nurse, the travel paths of the OR team as well as shortens the procedure duration. Additionally, the ergonomics of the OR staff were improved. Conclusion: The developed simulation method was evaluated in the actual intraoperative setting and proved its benefit for the design and optimization of OR setups for different surgical intervention types. As a clinical result, enhanced setups for total knee arthroplasty and total hip arthroplasty surgeries were established in daily clinical routine and the OR efficiency was improved.

No abstract

Introduction Hip and knee arthroplasties are very frequently performed surgeries with high quality standards and continuous optimization potential. Intraoperative processes can be standardized and simplified by optimization of table setups in the operating room to improve the quality and to increase efficiency. Patients and methods The existing surgical setups for primary hip and knee arthroplasties in a university maximum care hospital with endoprosthesis center were simulated and analysed with a computer program and optimized setup suggestions were worked out, based on handover times, walking distance and ergonomic aspects determined in the program. In a prospective monocentric analysis, primary hip arthroplasties and knee arthroplasties were examined in currently used and in the new optimized setups (standard procedure according to in-house SOP, senior and main surgeons, no assistants). The surgeries were externally and independently supervised and analysed, whereby the time between incision and suture beginning, handovers per minute and handover times were documented, amongst other things. In addition, an evaluation sheet, which showed the satisfaction with the new setup, was filled by the surgical team. Results In the period from April 2016 to December 2018, 19 hip arthroplasties in currently used and 15 in the new optimized setup as well as 9 knee arthroplasties in currently used and 13 in the new setup were performed. Attention was paid to constant conditions in the compared groups and disruptive factors (assisted surgeries, complex surgeries, different cementings, etc.) were excluded. In the group of hip arthroplasties, the handover times were significantly different (old 1.82 +/− 1.43 s.; new 1.08 +/− 0.78 s.; p <0.001), as well as the handovers per minute (old 1.62 +/− 0.45 handovers/min.; new 2.10 +/− 0.32 handovers/min.; p = 0,001). The time between incision and suture beginning indicated no significant difference (old 53.89 +/− 18.92 min.; new 49.73 +/− 12.18 min; p = 0.466): During the knee arthroplasties, handovers per minute were significantly different (old 1.83 +/− 0.38 handovers/min.; new 2.40 +/− 0.35 handovers/min.; p = 0.002). The time between incision and suture beginning (old 71.11 +/− 20.72 min.; new 70.69 +/− 17.12 min.; p = 0.959) and the handover times (old 1.06 +/− 0.64 s.; new 0.91 +/− 0.59 s.; p = 0.152) indicated no significant difference. The evaluation of the questionnaires showed a significant difference (p < 0.001) in the group of hip arthroplasties in the category “visibility”. For the knee arthroplasties, all items except “visibility” (p = 0.261) differed significantly. Overall, a high level of staff satisfaction with the new setup was achieved. Conclusions In both groups, more handovers per minute could be achieved in the optimized setup and in the group of the hip arthroplasties, the handover times were significantly faster. The evaluation sheet showed a high satisfaction of the surgical staff with the new setup. No reduction of the time between incision and suture beginning could be determined. This can be attributed to a certain training effect, the adjustment to the setup modification and the low number of cases. The new setup offers a practical alternative for hip arthroplasties as well as for knee arthroplasties as it optimizes the events in the operating room in many ways. For example, there were more handovers per minute possible and passing of the surgical instruments free from interferences. Moreover, it increases the efficiency and achieves a high satisfaction of the staff.

Abstract Background: The design and internal layout of modern operating rooms (OR) are influencing the surgical team’s collaboration and communication, ergonomics, as well as intraoperative hygiene substantially. Yet, there is no objective method for the assessment and design of operating room setups for different surgical disciplines and intervention types available. The aim of this work is to establish an improved OR setup for common procedures in arthroplasty. Methods With the help of computer simulation, a method for the design and assessment of enhanced OR setups was developed. New OR setups were designed, analyzed in a computer simulation environment and evaluated in the actual intraoperative setting. Thereby, a 3D graphical simulation representation enabled the strong involvement of clinical stakeholders in all phases of the design and decision-making process of the new setup alternatives. Results The implementation of improved OR setups reduced the instrument handover time between the surgeon and the scrub nurse, the travel paths of the OR team as well as shortened the procedure duration. Additionally, the ergonomics of the OR staff were improved. Conclusion The developed simulation method was evaluated in the actual intraoperative setting and proved its benefit for the design and optimization of OR setups for different surgical intervention types. As a clinical result, enhanced setups for total knee arthroplasty and total hip arthroplasty surgeries were established in daily clinical routine and the OR efficiency was improved.

Abstract Background The design and internal layout of modern operating rooms are influencing the team’s collaboration and communication, ergonomics, as well as intraoperative hygiene substantially. Nevertheless, there is no objective method for the assessment and design of the personnel and table positions for different surgical disciplines and intervention types available. The aim of this work is to establish an improved OR setup for common procedures in arthroplasty. Methods With the help of computer simulation techniques, a method for the objective design and assessment of enhanced OR setups was developed. In this work, new OR setups were designed, analyzed in a computer simulation environment and evaluated in the actual intraoperative setting. Results The implementation of improved OR setups reduces the instrument handover time between the surgeon and the scrub nurse, the travel paths of the OR team as well as shortens the procedure duration. Additionally, the ergonomics of the OR staff were improved. Conclusion The developed simulation method was intraoperatively evaluated and proved its benefit for the design and optimization of OR setups for different surgical intervention types. As a clinical result, enhanced setups for total knee arthroplasty and total hip arthroplasty surgeries were established in daily clinical routine and the OR efficiency was improved.

Abstract Background The design and internal layout of modern operating rooms are influencing the team’s collaboration and communication, ergonomics, as well as intraoperative hygiene substantially. Nevertheless, there is no objective method for the assessment and design of the personnel and table positions for different surgical disciplines and intervention types available. The aim of this work is to establish an improved OR setup for common procedures in arthroplasty. Methods With the help of computer simulation techniques, a method for the objective design and assessment of enhanced OR setups was developed. In this work, new OR setups were designed, analyzed in a computer simulation environment and evaluated in the actual intraoperative setting. Results The implementation of improved OR setups reduces the instrument handover time between the surgeon and the scrub nurse, the travel paths of the OR team as well as shortens the procedure duration. Additionally, the ergonomics of the OR staff were improved. Conclusion The developed simulation method was intraoperatively evaluated and proved its benefit for the design and optimization of OR setups for different surgical intervention types. As a clinical result, enhanced setups for total knee arthroplasty and total hip arthroplasty surgeries were established in daily clinical routine and the OR efficiency was improved.

Abstract Background The design and internal layout of modern operating rooms are influencing the team’s collaboration and communication, ergonomics, as well as intraoperative hygiene substantially. Nevertheless, there is no objective method for the assessment and design of the personnel and table positions for different surgical disciplines and intervention types available. The aim of this work is to establish an optimal OR setup for common procedures in arthroplasty.Methods With the help of computer simulation techniques, a method for the objective design and assessment of optimal OR setups was developed. In this work, new OR setups were designed, analyzed in a computer simulation environment and evaluated in the actual intraoperative setting.Results It was shown that the implementation of an optimized OR setup reduces the intraoperative instrument handover time between the surgeon and the scrub nurse, the travel paths of the OR team as well as shorten the procedure duration. Additionally, the ergonomics of the OR staff could be improved.Conclusion The developed simulation method was intraoperatively evaluated and proved its benefit for the design and optimization of OR setups for different surgical intervention types. As a clinical result, optimized setups for total knee arthroplasty and total hip arthroplasty surgeries were established in daily clinical routine and the OR efficiency was improved.