Nowadays, manufacturing of multi-material structures requires a variety of mechanical joining techniques. Mechanical joining processes and joining elements are used to meet a wide range of requirements, especially on versatile process chains. Most of these are explicitly adapted to only one, specific application. This leads to a less flexibility process chain due to many different variants and high costs. Changes in the boundary conditions like sheet thickness, or layers, lead to a need of re-design over the process and thus to a loss of time. To overcome this drawback, an innovative approach can be the use of individually manufactured and application-adapted joining elements (JE), the so-called Friction Spun Joint Connectors (FSJC). This new approach is based on defined, friction-induced heat input during the manufacturing and joining of the FSJC. This effect increases the formability of the initial material locally and permits them to be explicitly adapted to its application area. To gain a more detailed insight into the new process design, this paper presents a detailed characterization of the new joining technique with adaptive joining elements. The effects and interactions of relevant process variables onto the course and joining result is presented and described. The joining process comprises two stages: the manufacturing of FSJC from uniform initial material and the adaptive joining process itself. The following contribution presents the results of ongoing research work and includes the process concept, process properties and the results of experimental investigations. New promising concepts are presented and further specified. These approaches utilize the current knowledge and expand it systematically to open new fields of application.
Mechanical joining processes are an essential part of modern lightweight construction. They permit materials of different types to be joined in a way that is suitable for the loads involved. These processes reach their limits, however, as soon as the boundary conditions change. In most cases, these elements are specially adapted to the joining point and cannot be used universally. Changes require cost-intensive adaptation of both the element and the process control, thus making production more complex. This results in high costs due to the increased number of auxiliary joining element variants required and reduces the economic efficiency of mechanical joining. One approach to overcoming this issue is the use of adaptive auxiliary joining elements formed by friction spinning. This article presents the current state of research on pre-hole-free joining with adaptive joining elements. The overall process chain is illustrated, explained and analyzed. Special attention is paid to demonstrating the feasibility of pre-hole-free joining with adaptive joining elements. The chosen mechanical parameters are subsequently listed. Finally, a comprehensive outlook of the future development potential is derived.
Nowadays, the production of modern lightweight structures, like a body in white structure requires a wide variety of mechanical joining processes. To fulfill the various demands, mechanical joining processes and joining elements (JE) are used. Very often, they are adapted to the application, which leads in turn to a numerous of different variants, high costs, and loss of the process chain versatility. To overcome this drawback, an innovative approach is the usage of individually produced and task-adapted JE, the so-called friction spun joint connectors (FSJC). These connectors can be modified in shape as well as in material properties. This flexibility offers high potential for lightweight design but also increases the necessary analytical effort regarding the forming process as well as the manufactured joint’s properties. Therefore, a new analysis strategy based on the Finite-Element-Method (FEM) is proposed, which numerically determines the local load bearing capacity within a given joint in order to identify the critical regions for load transfer. The process of joining element manufacturing and the analysis strategy will be described in detail and optimization results of the joints are shown. Numerical results are discussed and possible recommendations for joint manufacturing are derived.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.