No abstract

In this study, we investigate the performance ratio (PR) of about 100 German photovoltaic system installations. Monitored PR is found to be systematically lower by~2-4% when calculated with irradiation data obtained by pyranometers (henceforth denoted as PR Pyr ) as compared with irradiation amounts measured by reference cells (denoted as PR Si ). Annual PR Si for the~100 systems is found to be between~70% and~90% for the year 2010, with a median PR of~84%. Next, simulations were performed to determine loss mechanisms of the top 10 performing systems, revealing a number of these loss mechanisms may still allow for some optimization. Despite the fact that we do not see such values from our monitoring data base up to now, we believe PR Si values above 90% are realistic even today, using today's commercially available components, and should be expected more frequently in the future. This contribution may help in deepening our knowledge on both energy loss mechanisms and efficiency limits on the system level and standardization processes of system-related aspects.

Accurate solar irradiance data are not only of particular importance for the assessment of the radiative forcing of the climate system, but also absolutely necessary for efficient planning and operation of solar energy systems. Within the European project Heliosat-3, a new type of solar irradiance scheme is developed. This new type will be based on radiative transfer models (RTM) using atmospheric parameter information retrieved from the Meteosat Second Generation (MSG) satellite (clouds, ozone, water vapour) and the ERS-2/ENVISAT satellites (aerosols, ozone).This paper focuses on the description of the clear-sky module of the new scheme, especially on the integrated use of a radiative transfer model. The linkage of the clear-sky module with the cloud module is also briefly described in order to point out the benefits of the integrated RTM use for the all-sky situations. The integrated use of an RTM within the new Solar Irradiance Scheme SOLIS is applied by introducing a new fitting function called the modified Lambert -Beer (MLB) relation. Consequently, the modified Lambert -Beer relation and its role for an integrated RTM use are discussed. Comparisons of the calculated clear-sky irradiances with ground-based measurements and the current clear-sky module demonstrate the advantages and benefits of SOLIS. Since SOLIS can provide spectrally resolved irradiance data, it can be used for different applications. Beside improved information for the planning of solar energy systems, the calculation of photosynthetic active radiation, UV index, and illuminance is possible. D

No abstract

No abstract