The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi‐electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single‐electron transfer, which are not ideal for multivalent‐ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope‐like voltage profiles with insertion/extraction redox of less than one electron. Taking VS 4 as a model material, reversible two‐electron redox with cationic–anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g −1 at a current density of 100 mA g −1 in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg −1 for RMBs and >500 Wh kg −1 for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg 2+ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS 4 .

The high-theoretical-capacity (∼170 mAh/g) Prussian white (PW), Na x Fe[Fe(CN) 6 ] y · n H 2 O, is one of the most promising candidates for Na-ion batteries on the cusp of commercialization. However, it has limitations such as high variability of reported stable practical capacity and cycling stability. A key factor that has been identified to affect the performance of PW is water content in the structure. However, the impact of airborne moisture exposure on the electrochemical performance of PW and the chemical mechanisms leading to performance decay have not yet been explored. Herein, we for the first time systematically studied the influence of humidity on the structural and electrochemical properties of monoclinic hydrated (M-PW) and rhombohedral dehydrated (R-PW) Prussian white. It is identified that moisture-driven capacity fading proceeds via two steps, first by sodium from the bulk material reacting with moisture at the surface to form sodium hydroxide and partial oxidation of Fe 2+ to Fe 3+ . The sodium hydroxide creates a basic environment at the surface of the PW particles, leading to decomposition to Na 4 [Fe(CN) 6 ] and iron oxides. Although the first process leads to loss of capacity, which can be reversed, the second stage of degradation is irreversible. Over time, both processes lead to the formation of a passivating surface layer, which prevents both reversible and irreversible capacity losses. This study thus presents a significant step toward understanding the large performance variations presented in the literature for PW. From this study, strategies aimed at limiting moisture-driven degradation can be designed and their efficacy assessed.

The ORCID identification number(s) for the author(s) of this article can be found under https://doi.org/10.1002/aenm.202103090.

The deposition of polyelectrolyte multilayers, obtained by the Layer-by-layer (LbL) method, is a well-established technology to design biocompatible and antibacterial coatings aimed at preventing implant-associated infections. Several types of LbL films have been reported to exhibit anti-adhesive and/or antibacterial (contact-killing or release-killing) properties governed not only by the incorporated compounds but also by their buildup conditions or their postbuildup treatments. Tannic acid (TA), a natural polyphenol, is known to inhibit the growth of several bacterial strains. In this work, we developed TA/collagen (TA/COL) LbL films built in acetate or citrate buffers at pH 4. Surprisingly, the used buffer impacts not only the physicochemical but also the antibacterial properties of the films. When incubated in physiological conditions, both types of TA/COL films released almost the same amount of TA depending on the last layer and showed an antibacterial effect against Staphylococcus aureus only for citratebuilt films. Because of their granular topography, TA/COL citrate films exhibited an efficient release-killing effect with no cytotoxicity towards human gingival fibroblasts. Emphasis is put on a comprehensive evaluation of the physico-chemical parameters driving the buildup and the antibacterial property of citrate films. Specifically, complexation strengths between TA and COL are different in the presence of the two buffers affecting the LbL deposition. This work constitutes an important step toward the use of polyphenols as antibacterial agent when incorporated in LbL films.

Metallic lithium is considered to be one of the most promising anode materials since it offers high volumetric and gravimetric energy densities when combined with high-voltage or high-capacity cathodes. However, the main impediment to the practical applications of metallic lithium is its unstable solid electrolyte interface (SEI), which results in constant lithium consumption for the formation of fresh SEI, together with lithium dendritic growth during electrochemical cycling. Here we present the electrochemical performance of a fluorinated reduced graphene oxide interlayer (FGI) on the metallic lithium surface, tested in lithium symmetrical cells and in combination with two different cathode materials. The FGI on the metallic lithium exhibit two roles, firstly it acts as a Li-ion conductive layer and electronic insulator and secondly, it effectively suppresses the formation of high surface area lithium (HSAL). An enhanced electrochemical performance of the full cell battery system with two different types of cathodes was shown in the carbonate or in the ether based electrolytes. The presented results indicate a potential application in future secondary Li-metal batteries.

High Entropy Sulfides In article number 2103090, Simon Schweidler, Ben Breitung and co‐workers synthesize and characterize high‐entropy sulfides with five transition metals in equimolar concentrations, with different M:S ratios by a simple one‐step mechanochemical approach. Two new types of single‐phase high‐entropy sulfides with pyrite (Pa‐3) and orthorhombic (Pnma) structures are obtained and used for the first time as electrode materials for battery applications.

The magnesium-sulfur (Mg-S) battery has attracted considerable attention as a candidate of post-lithium battery systems owing to its high volumetric energy density, safety, and cost effectiveness. However, the known shuttle effect of the soluble polysulfides during charge and discharge leads to a rapid capacity fade and hinders the realization of sulfur-based battery technology. Along with the approaches for cathode design and electrolyte formulation, functionalization of separators can be employed to suppress the polysulfide shuttle. In this study, a glass fiber separator coated with decavanadate-based polyoxometalate (POM) clusters/carbon composite is fabricated by electrospinning technique and its impacts on battery performance and suppression of polysulfide shuttling are investigated. Mg-S batteries with such coated separators and non-corrosive Mg[B(hfip) 4 ] 2 electrolyte show significantly enhanced reversible capacity and cycling stability. Functional modification of separator provides a promising approach for improving metal-sulfur batteries.

In this work, abundant and environmentally friendly nano-fibrillated (NFC) cellulose is used for fabrication of porous separator membranes according to the procedure adopted from papermaking industry. As-prepared NFC separators were characterized in terms of thickness, porosity, wettability, electrochemical stability and electrochemical performance in lithium-sulfur and Li-symmetrical pouch cells and compared to a commercial Celgard 2320 separator membrane. Results demonstrated that morphology and electrochemical performance of NFC separator outperforms the conventional polyolefin separator. Due to exceptional interplay between lithium metal and cellulose, this research provides a self-standing NFC separator that can be used besides the lithium-sulfur also in other lithium metal battery configurations.