We conducted experiments to determine whether bioaugmentation with aerobic, polychlorinated biphenyl (PCB)-degrading microorganisms can mitigate polychlorinated biphenyl (PCB) emissions from contaminated sediment to air. Paraburkholderia xenovorans strain LB400 was added to bioreactors containing PCB-contaminated site sediment. PCB mass in both the headspace and aqueous bioreactor compartments was measured using passive samplers over 35 days. Time-series measurements of all 209 PCB congeners revealed a 57% decrease in total PCB mass accumulated in the vapor phase of bioaugmented treatments relative to non-bioaugmented controls, on average. A comparative congener-specific analysis revealed preferential biodegradation of lower-chlorinated PCBs (LC-PCBs) by LB400. Release of the most abundant congener (PCB 4 [2,2′-dichlorobiphenyl]) decreased by over 90%. Simulations with a PCB reactive transport model closely aligned with experimental observations. We also evaluated the effect of the phytogenic biosurfactant, saponin, on PCB bioavailability and biodegradation by LB400. Time-series qPCR measurements of biphenyl dioxygenase (bphA) genes showed that saponin better maintained bphA abundance, compared to the saponin-free treatment. These findings indicate that an active population of bioaugmented, aerobic PCB-degrading microorganisms can effectively lower PCB emissions and may therefore contribute to minimizing PCB inhalation exposure in communities surrounding PCB-contaminated sites.

No abstract

This dataset describes the biodegradation of polychlorinated biphenyl (PCB) congeners by Paraburkholderia xenovorans LB400 in absence and presence of PCB-contaminated sediment slurry, over time [1] . In absence of sediment, PCBs were extracted from aqueous bioreactors by liquid-liquid extraction (LLE) with hexane. In presence of sediment, the extraction method used was a modification of U.S. EPA Method 3545 [3] . Sediment slurry samples were extracted from bioreactors using pressurized fluid extraction (Accelerated Solvent Extractor; Dionex ASE-200) with equal parts acetone and hexane. GC–MS/MS triple quadrapole technology in multiple reaction monitoring mode (MRM) was used for identification and quantification of 209 PCBs as 174 chromatographic peaks. Samples were processed in batches of five along with one method blank per batch. All materials used in sample extraction had either been triple rinsed with solvent (methanol, acetone, and hexane) or combusted overnight at 450 °C to prevent background PCB contamination. Results from the method blanks were used to determine the limit of quantification (LOQ) as the upper limit of the 95% confidence interval (average mass plus two times the standard deviation). PCB congener masses were corrected for surrogate recoveries less than 100%. The PCB concentration dataset was dichotomized at the threshold of the congener specific LOQ. Concentrations of congeners below the LOQ were treated as zero. During analysis, PCB concentration data was filtered to include only congeners belonging to the commercial PCB mixture, Aroclor 1248. LOQ corrected data can inform future experimental design and be reused by other researchers for further analysis and / or interpretive insights.

No abstract

Carbon nanotubes represent precursors for disinfection byproducts during chlorination, where the extent of formation is linked to their surface chemistry.

No abstract