Mergers and Acquisitions The crystallization of small molecules or polymers is often described in terms of a nucleation stage, where initial clusters form, followed by a distinct growth stage. Growth can come from the addition of unbound molecules, or through “Ostwald ripening” where larger crystals grow at the expense of smaller ones due to thermodynamic effects. Zheng et al. (p. 1309 ) studied the growth of platinum nanocrystals inside a transmission electron microscope using a special liquid cell, allowing observation of crystal growth in situ. Both monomer addition to growing particles and the coalescence of two particles were observed. The specific growth mechanism appeared to be governed by the size of each of the particles. The combination of growth processes makes it possible for an initially broad distribution of particles to narrow into an almost uniform one.

The design and synthesis of protein-like polymers is a fundamental challenge in materials science. A biomimetic approach is to explore the impact of monomer sequence on non-natural polymer structure and function. We present the aqueous self-assembly of two peptoid polymers into extremely thin two-dimensional (2D) crystalline sheets directed by periodic amphiphilicity, electrostatic recognition and aromatic interactions. Peptoids are sequence-specific, oligo-N-substituted glycine polymers designed to mimic the structure and functionality of proteins. Mixing a 1:1 ratio of two oppositely charged peptoid 36mers of a specific sequence in aqueous solution results in the formation of giant, free-floating sheets with only 2.7 nm thickness. Direct visualization of aligned individual peptoid chains in the sheet structure was achieved using aberration-corrected transmission electron microscopy. Specific binding of a protein to ligand-functionalized sheets was also demonstrated. The synthetic flexibility and biocompatibility of peptoids provide a flexible and robust platform for integrating functionality into defined 2D nanostructures.

No abstract

Hydrogen is a promising alternative energy carrier that can potentially facilitate the transition from fossil fuels to sources of clean energy because of its prominent advantages such as high energy density (142 MJ kg(-1); ref. 1), great variety of potential sources (for example water, biomass, organic matter), light weight, and low environmental impact (water is the sole combustion product). However, there remains a challenge to produce a material capable of simultaneously optimizing two conflicting criteria--absorbing hydrogen strongly enough to form a stable thermodynamic state, but weakly enough to release it on-demand with a small temperature rise. Many materials under development, including metal-organic frameworks, nanoporous polymers, and other carbon-based materials, physisorb only a small amount of hydrogen (typically 1-2 wt%) at room temperature. Metal hydrides were traditionally thought to be unsuitable materials because of their high bond formation enthalpies (for example MgH(2) has a ΔHf~75 kJ mol(-1)), thus requiring unacceptably high release temperatures resulting in low energy efficiency. However, recent theoretical calculations and metal-catalysed thin-film studies have shown that microstructuring of these materials can enhance the kinetics by decreasing diffusion path lengths for hydrogen and decreasing the required thickness of the poorly permeable hydride layer that forms during absorption. Here, we report the synthesis of an air-stable composite material that consists of metallic Mg nanocrystals (NCs) in a gas-barrier polymer matrix that enables both the storage of a high density of hydrogen (up to 6 wt% of Mg, 4 wt% for the composite) and rapid kinetics (loading in <30 min at 200 °C). Moreover, nanostructuring of the Mg provides rapid storage kinetics without using expensive heavy-metal catalysts.

Energy-filtered transmission electron microscopy (EFTEM) was used to determine the distribution of lithium ions in solid polymer electrolytes for lithium batteries. The electrolytes of interest are mixtures of bis(trifluoromethane)sulfonimide lithium salt and symmetric poly(styrene-block-ethylene oxide) copolymers (SEO). In contrast to current solid and liquid electrolytes, the conductivity of SEO/salt mixtures increases with increasing molecular weight of the copolymers. EFTEM results show that the salt is increasingly localized in the middle of the poly(ethylene oxide) (PEO) lamellae as the molecular weight of the copolymers is increased. Calculations of the inhomogeneous local stress field in block copolymer microdomains, modeled using self-consistent field theory, provide a quantitative explanation for this observation. These stresses, which increase with increasing molecular weight, interfere with the ability of PEO chains to coordinate with lithium cations near the walls of the PEO channels where ion mobility is expected to be low.

Ferroelectricity in finite-dimensional systems continues to arouse interest, motivated by predictions of vortex polarization states and the utility of ferroelectric nanomaterials in memory devices, actuators and other applications. Critical to these areas of research are the nanoscale polarization structure and scaling limit of ferroelectric order, which are determined here in individual nanocrystals comprising a single ferroelectric domain. Maps of ferroelectric structural distortions obtained from aberration-corrected transmission electron microscopy, combined with holographic polarization imaging, indicate the persistence of a linearly ordered and monodomain polarization state at nanometre dimensions. Room-temperature polarization switching is demonstrated down to ~5 nm dimensions. Ferroelectric coherence is facilitated in part by control of particle morphology, which along with electrostatic boundary conditions is found to determine the spatial extent of cooperative ferroelectric distortions. This work points the way to multi-Tbit/in(2) memories and provides a glimpse of the structural and electrical manifestations of ferroelectricity down to its ultimate limits.

Recent advances in aberration-correcting electron optics have made sub-Ångstrom imaging in transmission electron microscopy almost routine in both the broad beam and the scanning probe modes [1][2][3][4]. The desire to further improve the spatial resolution in electron microscopy is driven in large part by the need for increased sensitivity, image contrast [5] and atomic-resolution tomography [6]. In this Letter, we report on utilizing a new generation aberration-corrected microscope to form a highly coherent sub-50 pm electron probe at 300 kV and demonstrate that this probe is capable of resolving the 47 pm dumbbell spacing in a Ge 〈114〉 crystal.In scanning transmission electron microscopy (STEM), the size of the electron probe that is focused onto the specimen ultimately limits the spatial resolution. Apart from mechanical and electrical stability, the size of the probe is determined by the illumination half-angle α, residual coherent axial aberrations, and incoherent broadening due to partial temporal and partial spatial coherence given by the finite energy length and the finite size of the demagnified electron source, respectively.

The study of first-order structural transformations has been of great interest to scientists in many disciplines. Expectations from phase-transition theory are that the system fluctuates between two equilibrium structures near the transition point and that the region of transition broadens in small crystals. We report the direct observation of structural fluctuations within a single nanocrystal using transmission electron microscopy. We observed trajectories of structural transformations in individual nanocrystals with atomic resolution, which reveal details of the fluctuation dynamics, including nucleation, phase propagation, and pinning of structural domains by defects. Such observations provide crucial insight for the understanding of microscopic pathways of phase transitions.