Herrn Univ.‐Prof. Dr.‐Ing. Rolf Kindmann zur Vollendung seines 70. Lebensjahres gewidmet Die Verwendung von pultrudierten glasfaserverstärkten Kunststoffprofilen als Primärstruktur findet eine immer weitere Verbreitung im Bauwesen. Momentan werden Stahlbauschrauben mit einem Durchmesser größer 10 mm für die Verbindung von vorgefertigten Bauteilen auf der Baustelle verwendet. Dieser Beitrag berichtet über Untersuchungen zu möglichen Alternativen zu diesem aus dem Stahlbau stammenden Verbindungsmittel. In umfangreichen Versuchen werden die Eigenschaften von Scher‐Lochleibungs‐Verbindungen mit gewindefurchenden Schrauben, Mehrbereichsblindnieten, hochfesten Strukturnieten, Selbstbohrschrauben sowie Schließringbolzen im Hinblick auf die Anwendbarkeit für die Verbindung von pultrudierten glasfaserverstärkten Kunststoffprofilen untersucht und bewertet.
The new BÜV-code for structural design of polymers in load bearing structures (2010-08).Fibre-reinforced polymer composites (FRP) have found a growing market in the construction sector. In special fields of application FRP offer high strength to weight ratio, excellent corrosion resistance, high thermal insulation and electrical isolation. With the BÜV-code "polymers in load bearing structures" (2010-08) a guideline for structural analysis and design of FRP is presented. Special focus is laid on the "duration of load"-effect and the necessary design checks compared with the codes for timber structures. The paper ends with a short worked example of the structural design of a FRP-beam used as load bearing structure in a roof.
Die Tragwerksbemessung für den Brandfall kann für ungeschützte Stahlkonstruktionen auf der Grundlage von Eurocode 3, Teil 1-2 erfolgen. Bei der Ermittlung der Bauteilwiderstände wird dabei die temperaturabhängige Abminderung der Steifigkeit und der Festigkeit des Baustoffes Stahl berücksichtigt. Der Eurocode 3, Teil 1-2 beinhaltet ein Zeitschrittverfahren, mit welchem die Stahltemperatur in kleinen Zeitintervallen schrittweise aus einem beliebigen zeitlichen Verlauf der einwirkenden Brandgastemperatur berechnet werden kann. Dieses aufwändige Verfahren ist notwendig, da sich zum einen die Wärmekapazität des Stahls bei steigender Temperatur ändert und zum anderen der Wärmestrom zwischen Brandgas und Stahl abhängig von der Temperaturdifferenz beider Stoffe ist. Für die Heißbemessung ungeschützter Stahlprofile werden im vorliegenden Beitrag Bemessungshilfen für häufig verwendete Walzprofilquerschnitte vorgestellt, die für die Feuerwiderstandsklasse R30 ein direktes Ablesen der Stahltemperatur aus Tabellen ermöglichen, ohne dass eine Zeitschrittberechnung erforderlich ist. Diese Hilfen für die Berechnung der Stahltemperatur werden ergänzt durch Bemessungshilfen in Form von Tabellen, aus denen die Querschnittsklassen im Brandfall und die Traglasten im Brandfall für Biegeknicken und Biegedrillknicken direkt abgelesen werden können. Die Anwendung der Bemessungshilfen wird anhand von Beispielen erläutert.Design tables for the fire design of unprotected steel sections due to Eurocode 3 part 1-2. Fire design for unprotected steel sections is based on Eurocode 3 part 1-2 using reduction factors for material properties at elevated temperatures. To calculate the steel tem perature during a fire Eurocode 3 part 1-2 gives a time-increment-method which is not suitable for hand calculations. For this reason this paper presents design tables with steel temperatures of steel sections subjected to a fire resistance class R30 respectably 30 min of a standard fire. Additional design tables are presented for the fire design of steel members subjected to buckling and lateral torsional buckling. The use of the design tables is illustrated by worked examples. 1 Thermische Einwirkungen und Temperaturberechnung Die Bemessung tragender Bauteile aus Stahl im Brandfall, häufig als Heißbemessung bezeichnet, kann in Deutschland seit Jahresanfang 2012 auf der Basis von DIN EN 1993-1-2 (2010-12) [1] und dem zugehörigen nationalen Anhang DIN EN 1993-1-2/NA (2010-12) [2] erfolgen. Für die Ermittlung der thermischen und der mechanischen Einwirkungen auf das Tragwerk im Brandfall benötigt der Anwender zusätzliche Informationen aus den Normen DIN EN 1991-1-2 (2010-12) [3] mit dem nationalen Anhang DIN EN 1991-1-2/NA (2010-12) [4] und DIN EN 1990 (2010 [5] mit dem nationalen Anhang DIN EN 1990/NA (2010 [6].In Abschnitt 3 der DIN EN 1991-1-2 (2010 [3] sind die thermischen Einwirkungen für die Temperaturberechnung des Tragwerkes geregelt. Abschnitt 3.2 beinhaltet nominelle Temperaturzeitkurven und Abschnitt 3.3 beinhaltet Naturbrandmodelle, welche die proj...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.