No abstract

No abstract

No abstract

A wide variety of fillers are currently used in more than twenty types of polymer resins, although four of them alone (polypropylene, polyamides, thermoplastic polyesters, and polyvinyl chloride) account for 90% of the market of mineral fillers in plastics. Polypropylene (PP) and PVC dominate the market for calcium carbonate. PP is a versatile reinforcement material that can meet engineering and structural specifications and is widely used for automotive components, home appliances, and industrial applications. Talc, mica, clay, kaolin, wollastonite, calcium carbonates, feldspar, aluminum hydroxide, glass fibers, and natural fibers are commonly used in fillers. Among these, calcium carbonate (both natural and synthetic) is the most abundant and affords the possibility of improved surface finishing, control over the manufacture of products, and increased electric resistance and impact resistance. Meeting the global challenge to reduce the weight of vehicles by using plastics is a significant issue. The current the global plastic and automobile industry cannot survive without fillers, additives, and reinforcements. Polypropylene is a major component of the modern plastic industry, and currently is used in dashboards, wheel covers, and some engine parts in automobiles. This article reports that the use of calcium carbonate fillers with polypropylene is the best choice to enhance the mechanical properties of plastic parts used in automobiles.

Abstract:One of the undesirable characteristics of some ground and natural water sources is hardness. Hard water can cause many problems around the world, including increased scaling on water pipes, boilers, atopic eczema and odd-tasting drinking water. Hardness in natural water is caused by dissolved minerals, mainly calcium and magnesium compounds. According to the Water Quality Association (WQA) and the United States Geological Survey (USGS), hard water is classified based on the Ca 2+ and Mg 2+ ion concentration in waters, as follows: 0-60 ppm as soft; 61-120 ppm as moderately hard; 121-180 ppm as hard and more than 180 ppm as very hard water. Most water utilities consider a hardness level between 50 and 150 ppm of CaCO 3 as publicly acceptable. The present study investigated the effects of a carbonation process on the removal of hardness in different water samples. Currently, a wide variety of hardness removal technologies are available. Among those conventional methods, carbonation is an inexpensive process which can be used for the removal of Ca 2+ and Mg 2+ ions from hard water. This study measured the hardness levels of 17 different water samples using the ethylene diamine tetra acetic acid (EDTA) method. Among these, Seoul outdoor swimming pool water (140 ppm) samples showed high concentrations of Ca 2+ and Mg 2+ ions. The hardness of the different water samples was reduced by 40-85% by a carbonation process with a closed pressure reactor for a 5 min reaction time.

No abstract

No abstract

No abstract