Solution based processes such as screen printing and spray coating are established processes for fabricating organic solar cells (OSCs) on flexible polymer substrates. However, realizing a flexible solar cell on a textile substrate remains a significant challenge due to the properties of the textile itself, which can present an absorbent, rough and fibrous surface. The textile also limits processing temperatures which can reduce functional materials performance. In this work, we demonstrate an optimized fabrication approach using entirely spray coating to fabricate textile OSCs with a power conversion efficiency (PCE) of 0.4 %. An interface layer is first deposited on the standard woven textile that forms a smooth supporting layer for the subsequent spray coated functional layers. A top encapsulation layer is deposited on top of the fabricated textile OSCs, which improves the durability and life time of the OSCs is evidenced by cyclic bending test.

No abstract

Green LEDs do not show the same level of performance as their blue and red cousins, greatly hindering the solid-state lighting development, which is so-called "green gap". In this work, nano-void photonic crystals (NVPCs) were fabricated to embed within the GaN/InGaN green LEDs by using epitaxial lateral overgrowth (ELO) and nano-sphere lithography techniques. The NVPCs act as an efficient scattering back-reflector to outcouple the guided and downward photons, which not only boosting light extraction efficiency of LEDs with an enhancement of 78% but also collimating the view angle of LEDs from 131.5゜to 114.0゜. This could be because the highly scattering nature of NVPCs which reduce the interference giving rise to Fabry-Perot resonance. Moreover, due to the threading dislocation suppression and strain relief by the NVPCs, the internal quantum efficiency was increased by 25% and droop behavior was reduced from 37.4% to 25.9%. The enhancement of light output power can be achieved as high as 151% at a driving current of 350 mA. Giant light output enhancement and directional control via NVPCs points the way towards a promising avenue of solid-state lighting.

No abstract

In this paper,we propose a hybrid quantum dot (QD)/Solar cell configuration to improve the performance of IBC silicon solar cells through efficient utilisation of resonant energy transfer (RET) and luminescent downshifting (LDS).